spray dryer
Model：
CAN-SPD74-1500AS
Applied range：
Spraydrying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder, granular or block solid products from solution, emulsion, suspension and plastic paste liquid raw materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet precise criteria. Spray drying is an ideal process.
Date issued：
2024-12-23 21:27:16
Equipment Size：
W550mm* D650mm * H1300mm
Weight：
110kg
Details
Voltage | 220V/50HZ |
Dimensions | W550 * D650 H1300mm |
Power | About 6kw |
Weight | 110kg |
Spray adjustment range | 0-0.5MPa (recommended 0.1-0.2MPa) |
minimum feed capacity | 50ml |
Electric box heat dissipation | Brushless DC motor fan heat dissipation |
average drying time | 1.0~1.5S |
Spray air compressor | Oil-free air compressor |
Temperature sensor | PT-100 thermocouple |
Temperature adjustment accuracy | Inlet temperature 1 ℃ |
liquid feeding pump | rotor peristaltic pump maximum 2000 ml/H (feed pipe: imported silicone peristaltic pipe) |
temperature setting range | 30-300 ℃, outlet temperature 30-140 ℃,PID automatically controls outlet temperature; (It is difficult to recover light materials. Please inform our company in advance to design a machine with 200 air inlet for you, and the recovery rate will be higher) |
Fan | Single-phase low-noise fan, fan flow rate: 9.5m ³/min, air pressure: 1.1KPa, air inlet treatment fiber cotton filtration |
Equipment control mode | Program is programmed into touch screen control, PLC system programming |
Spray air connection diameter | 6mm outer diameter air pipe |
Water evaporation capacity | 1500-2000 mL/h |
nozzle diameter | Optional 1.0/1.5/2.0/2.2mm standard configuration 1.0mm |
Spray pressure air inlet | 106L/min; Exhaust volume: 36L/min; Input power 580W |
atomization mode | 2 fluid atomization nozzle 316 material |
& nbsp; & nbsp; & nbsp; Spray drying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder
1. the whole machine is made of high-quality stainless steel;
2. the atomization chamber