| Detailed Technical Specifications |
| Item |
Parameters and Description |
| External Dimensions |
φ88 mm × H240 mm |
| Mold Cavity (Working Chamber) |
Standard inner diameter φ10 mm (mold cavity diameter can be customized) |
| Upper/Lower Electrode Posts |
High-strength mold steel |
| Mold Cavity Lining Material |
Standard φ10 mm cavity |
| Maximum Load (Standard) |
4 tons (standard configuration, corresponding to approximately 500 MPa pressure inside the φ10 mm mold cavity)( Customized solutions are available for higher pressures required to meet special processes such as ultimate densification.) |
| Operating Temperature Range |
Room temperature ~80℃ |
| Data Acquisition System |
Accompanying professional software for sensor use and data recording. |
| Software Download |
https://pan.quark.cn/s/8c8a411f134c |
| Applications |
Solid-state battery electrolyte sheet preparation, composite electrode pressing, full-cell stack cold/hot pressing, interface contact impedance research, etc. |
| Pressure conversion reference |
When the diameter of the pole is 10 mm, applying a load of about 0.8 tons can generate a pressure of about 100 MPa in the mold cavity. |
