Details
Warning: Open this product only below a dew point of −27°C; otherwise it will readily absorb moisture and deteriorate.
This is a high-voltage sodium iron sulfate cathode material for sodium-ion batteries. Ambient humidity must be controlled throughout the entire preparation process.
Sodium‑ion battery cathode material, sodium iron sulfate (NFS), high‑voltage. Humidity‑controlled environment is required throughout the whole preparation process.
Physicochemical Properties
| No. | Category | Test Item | Unit | Specification | Actual Result | Test Method / Instrument |
| 1 | Chemical Composition | Na | wt% | 14.0 ± 1.0 | 14.05 | ICP |
| 2 | Chemical Composition | Fe | wt% | 22.5 ± 1.5 | 22.93 | ICP |
| 3 | Chemical Composition | S | wt% | 20.5 ± 1.5 | 21.21 | ICP |
| 4 | Chemical Composition | C | wt% | 2.0 ± 1.0 | 1.39 | ICP |
| 5 | Magnetic Impurities | Fe + Cr + Ni + Zn | ppm | ≤ 1 | 0.05 | ICP |
| 6 | Physical Properties / Particle Size Distribution | D10 | μm | ≥ 0.6 | 0.65 | Laser Particle Size Analyzer |
| 7 | Physical Properties / Particle Size Distribution | D50 | μm | 1.5–2.5 | 2.22 | Laser Particle Size Analyzer |
| 8 | Physical Properties / Particle Size Distribution | D90 | μm | ≤ 10.0 | 6.61 | Laser Particle Size Analyzer |
| 9 | Physical Properties | BET Specific Surface Area | m²/g | 5.0–10.0 | 8.17 | Fully Automatic Specific Surface Area and Pore Size Analyzer |
| 10 | Physical Properties | Tap Density (TD) | g/cm³ | 0.9–1.2 | 1.14 | Tap Density Tester |
| 11 | Physical Properties | Compacted Density (CD) | g/cm³ | 1.6–1.8 | 1.72 | Tap Density Tester |
| 12 | Physical Properties | Moisture Content | ppm | ≤ 1000 | 122.4 | Moisture Analyzer |
| 13 | Electrochemical Performance | Initial Discharge Specific Capacity | mAh/g | ≥ 90.0 | 94.6 | CR2032, 0.1C/0.1C (4.5–2.0 V) |
| 14 | Electrochemical Performance | Initial Coulombic Efficiency | % | ≥ 96.0 | 96.6 | CR2032, 0.1C/0.1C (4.5–2.0 V) |
Packaging, Transportation and Storage
Packaging Requirement: Inner sealed plastic bottle, outer vacuum‑sealed aluminum‑plastic film.
Storage Requirement: Keep vacuum‑sealed, store in a cool and dry place.
Need R&D Support?
Browse key product categories and connect battery materials with Canrd's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrd R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrd to match products, materials, and services for your project.
Get product and R&D support →



