Details
1. Before use, please wipe the surface of the machine with a clean cloth to remove rust oil.
2. Press the handle forward to test the operation of the machine. Do not press the handle backward, as it may damage the internal cross shaft of the machine.
3. After testing the operation, place materials smaller than the feeding port width into the machine for cutting.
4. Cutting materials: PVC paper and other related materials. Note: It is not recommended to cut metal materials unless the machine is designed for it.
5. Generally, the cutting thickness is 0.1-0.76mm. For thickness above 0.76mm, diagonal panel design is recommended.
6. If the inner mold cannot be reset before use, you can place a piece of cloth on the inner mold and tap it with a tool to reset it. This is caused by possible impact during transportation and does not constitute a quality issue. If the problem persists after tapping, please do not continue tapping.
7. If the machine gets stuck when opening, and the inner mold cannot pop out, observe the blocked area. If it is not significant, press the handle to pop out the inner mold. If the blockage is severe, please return it for repair. Do not disassemble it by yourself, as it may not be reassembled properly. Any self-disassembly and repair will not be covered under warranty.
8. For the use of large-sized color card machines, if you encounter noise during operation, you can apply some lubricating oil under the handle for smooth movement. If there are loose screws on the small machine's baseboard, you can open the baseboard and oil the cross shaft, but the baseboard should not be reinstalled.
Specifications: Customizable to any size
Cutting objects: Foam nickel or stainless steel mesh with low hardness, cutting separator or other soft materials, copper foil, aluminum foil, cathode and anode electrode is not ideal (professional punching machine is required for punching)
Cutting lifespan: Over 100,000 times
Key points: The inner and outer molds are integrated and the mold blades cannot be replaced.
Machine weight: 6KG
Dimensions: 25*20*20cm
Need R&D Support?
Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrud R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrud to match products, materials, and services for your project.
Get product and R&D support →