Details
This product is designed as a ready-to-use sodium negative electrode chip for coin cell assembly, specifically developed for research on sodium-ion batteries and related energy storage systems. The chip features a composite structure consisting of a transparent protective film, a high-purity sodium layer (≥99.7%), an aluminum foil current collector, and a blue protective film. Available in standard diameters such as 15.6 mm, 14 mm, and 18 mm, with a uniform thickness of 0.45 mm, the chip ensures consistent surface smoothness and dimensional accuracy. This design minimizes common issues like surface burrs, uneven size, or micro-short circuits that can arise from manually prepared electrodes. The product is supplied in a vacuum-sealed can with argon protection, requiring handling inside a glove box. Common applications include use as the anode in CR2032, CR2025, or CR2016 button cells for evaluating electrode materials or electrolytes in sodium-based battery research.
- This product is sold by Huizhou Canrd New Materials Technology Co., Ltd.
- A video must be recorded before unpacking the product. This video must include the dew point in the dry room or glove box, water and oxygen levels, the product production date, and a clear appearance. Any abnormal appearance after unpacking without video evidence will not be handled (appearance abnormalities after the expiration date will not be accepted).
1. There is air inside the plastic black can. Open the can outside the glove box, and take the aluminum foil bag into the glove box before unpacking (it is recommended to unpack the aluminum foil bag before use, it is better for storage, and it is not recommended to stock too much, buy as needed).
2. Hold the flat and widened tweezers with your left hand, and use the pointed stainless steel tweezers with your right hand. It is best not to use rubber tweezers to remove the film.
3. Both sides of the film (blue film, transparent film) should be removed. You can also remove the film with the help of the instructional video (remove the blue film first, then remove the transparent film). Install one battery per peeled piece, and tightly seal the remaining products in a white bottle for long-term storage.
4. The side with the blue film is aluminum foil, and the transparent film is sodium piece. Install it facing the separator and avoid installing it in reverse.
5. Both sides of the film should be removed (aluminum foil can be left unpeeled).
The composite sodium electrode piece is divided into four layers, from top to bottom: transparent protective film, sodium piece, aluminum foil, blue protective film. The diameter of the sodium electrode piece is 15.6/14/18mm (commonly used specification is 15.6mm), with an overall thickness of 0.45-0.55mm (pure sodium piece thickness is 0.4-0.5mm), purity is above 99.7%, specially designed for button batteries (2032, 2025, 2016).

Supplementary Instructions for Use:
The size is uniform, the surface is smooth and bright, it can be stored for a long time, used as needed, greatly improving the efficiency and performance consistency and stability of battery assembly, avoiding low efficiency of self-made discs, inconsistent performance caused by uneven size, and micro short circuit caused by burrs and scratches on the surface.
Questions Fréquemment Posées
Recherchez ou parcourez les questions courantes pour trouver rapidement des réponses

Besoin de support R&D ?
Parcourez les categories produits cles et reliez les materiaux batterie aux services R&D de Canrd.
Materiaux experimentaux
CategorieCathodes, anodes, electrolytes, separateurs et autres materiaux de recherche batterie.
Acheter des materiaux cathode, anode et electrolyte →Equipement de laboratoire
CategorieEquipements de laboratoire batterie pour lignes pilotes, outillages et workflows de test.
Parcourir les equipements de laboratoire batterie →Electrodes et cellules
CategorieElectrodes personnalisees, cellules seches et composants de cellules pour validation R&D.
Voir les electrodes et cellules batterie personnalisees →Electrolyte sodium
CategorieElectrolytes sodium-ion pour recherche et validation de batteries sodium.
Acheter des electrolytes sodium →Services R&D
ServiceServices R&D batterie complets, de l evaluation materiaux a la fabrication de cellules et analyse de defaillance.
Explorer les services R&D Canrd →Evaluation de materiaux
ServiceCaracterisation, tests electrochimiques et evaluation de compatibilite des materiaux batterie.
Evaluer vos materiaux batterie →Fabrication d electrodes
ServiceFeuilles et rouleaux d electrodes personnalises selon votre chimie cible et vos besoins process.
Demander une fabrication d electrodes →Fabrication de cellules
ServiceCellules seches, cellules assemblees et formats personnalises pour validation R&D.
Construire des cellules de recherche personnalisees →Contact
PageDemandez a Canrd d associer produits, materiaux et services a votre projet.
Obtenir un support produit et R&D →


