High-Rate Lithium Cobalt Oxide (LCO) - C

Name: High-Rate Lithium Cobalt Oxide (LCO) - C
Brand: Canrd
Price: 45.31 USD
Availability: InStock

$45.31

Número do item:MA-EN-CA-000401

Especificações

✓ Selecionado: 20g

Quantidade

Garantia de Qualidade

Venda direta da fábrica

Envio mundial

Details

This product is a single-crystal lithium cobalt oxide (LCO) cathode material specifically designed for high-rate applications. Its small particle size and large specific surface area facilitate rapid lithium-ion insertion and extraction, resulting in excellent rate capability and cycling stability. Compared to conventional LiCoO₂, this material requires a higher proportion of conductive agents and binders in the electrode formulation to ensure efficient electronic transport, and its electrode compaction density is approximately 0.3–0.5 g/cc lower. It demonstrates good processability and stable quality, making it suitable for commercial mass production. Common applications include high-rate devices such as drones and electronic cigarettes, and it is also convenient for pouch cell and coin cell research in laboratory settings. Storage should be under sealed conditions at room temperature, with a shelf life of two years. A compatible electrolyte, such as lithium cobalt oxide electrolyte (KLD-1376), is recommended for optimal performance.

1. Due to the small particle size and large specific surface area of the material, compared with the positive electrode formula of ordinary LiCoO2, more conductive and adhesive agents are required to ensure good electronic transmission network.

2. Due to the small particle size, the compaction density of the electrode sheet is 0.3-0.5g/cc lower than that of conventional LiCoO2.

1. MA-EN-CA-0R lithium cobalt oxide, single crystal structure, with small particle size and large specific surface area, facilitating rapid insertion and extraction of lithium ions, resulting in excellent rate performance and good cycling stability.

2. Good processability and stable quality for commercial mass production.

3. Widely used in high-rate requirement products such as drones and electronic cigarettes.

4. Convenient for research on pouch cells and coin cells.

Test Item		Unit	Specification	Measured Result	Test Method
Chemical Composition	Co	(%)	≥58.5	59.82	ICP
	Li	(%)	7.0±0.3	7.20
	Mg	(ppm)	700~1100	923.0
	Ti	(ppm)	1300~1700	1489.0
	Al	(ppm)	200~600	325.2
	Magnetic Substances	(ppb)	≤300.0	27.50	Acid Titration
Physical Properties	Particle Size Distribution - D10	(μm)	≥2.0	3.526	Laser Particle Size Analyzer
	Particle Size Distribution - D50	(μm)	6.4±1.0	6.728
	Particle Size Distribution - D90	(μm)	≤20.0	10.920
	BET	(m2/g)	0.3~0.6	0.40	Automated Surface Area & Porosity
	TD	(g/cm3)	≥2.0	2.38	Tap Density Tester
	pH	/	≤11.2	10.52	pH Meter
	Moisture	(ppm)	≤300	128.2	Moisture Analyzer
Electrochemical Performance	Initial Discharge Capacity	(mAh/g)	≥170.0	175.9	CR2032
Electrochemical Performance	Initial Efficiency	(%)	≥97.0	98.4	0.1/0.1C(4.40-3.00V)

SEM image:

LiCoO2 (high rate)-C.png

Charge/discharge curve:

1. Storage conditions: sealed storage at room temperature.
2. Shelf life: 2 years from the production date.

Remarks:
1、CC – Constant Current Charge; DC – Constant Current Discharge; CV – Constant Voltage Charge
2、Recommended Electrolyte: Lithium Cobalt Oxide Electrolyte (KLD-1376)