R&D Services

Material Evaluation & Testing、Electrode Fabrication、Cell Fabrication、Electrical & Safety Testing、Failure & Root Cause Analysis

Graphite (Conventional Type) - A

$15.10

Número do item:MA-EN-AN-001801

Especificações

✓ Selecionado: 20g

Garantia de Qualidade

Venda direta da fábrica

Envio mundial

Details

Visão Geral

Detalhes

This product is a conventional artificial graphite anode material developed for lithium-ion battery research and experimental applications. With a D50 particle size of approximately 15.6 μm and a BET specific surface area around 1.4 m²/g, it offers a balance of high tap density (1.21 g/cm³) and low ash content (0.01%), supporting consistent electrode preparation. The material delivers an initial reversible capacity of ≥330 mAh/g and an initial Coulombic efficiency of ≥92%, enabling long cycle life and reliable performance under both high and low temperature conditions. Its optimized particle size distribution (D10: ~7.7 μm, D90: ~29.2 μm) facilitates stable slurry processing. Recommended for use with graphite coin cell electrolyte (KLD-1230C) and controlled compaction—double-sided at 1.55 g/cm³ or single-sided below 1.2 g/cm³ to avoid curling—this material is well suited for evaluating anode performance in energy storage research.

Long cycle life.
Good high and low-temperature performance.
Excellent comprehensive performance.

SEM

No.	Category	Test Item	Unit	Specification	Test Result
1	Physical Properties	Particle Size Distribution - D10	(μm)	7.0 ± 2.0	7.68
2		Particle Size Distribution - D50	(μm)	15.0 ± 2.0	15.62
3		Particle Size Distribution - D90	(μm)	31.0 ± 3.0	29.22
4		BET Specific Surface Area	(m²/g)	1.3 ± 0.3	1.38
5		Tap Density (TD)	(g/cm³)	1.2 ± 0.1	1.21
6		Ash Content	(%)	≤ 0.05	0.01
7	Electrochemical Performance	Initial Reversible Capacity	(mAh/g)	≥ 330.0	/
8		Initial Coulombic Efficiency (ICE)	(%)	≥ 92.0	/

Notes: 1. CC = Constant Current Charging; DC = Constant Current Discharging; CV = Constant Voltage Charging

2. Recommended electrolyte: Graphite coin cell electrolyte (KLD-1230C)

It is recommended that the double-sided compaction density be 1.55 g/cm³, and the single-sided compaction density be below 1.2 g/cm³ to prevent curling.