Fast Charging Graphite-B

Name: Fast Charging Graphite-B
Brand: Canrd
Price: 22.65 USD
Availability: InStock

$22.65

Número do item:MA-EN-AN-001301

Especificações

✓ Selecionado: 20g

Quantidade

Garantia de Qualidade

Venda direta da fábrica

Envio mundial

Details

Visão Geral

Especificações

Detalhes

This graphite material is developed for high-rate fast-charging applications in advanced lithium-ion battery research. As an anode-grade product, it exhibits a D50 particle size of approximately 9.0 µm with a narrow distribution, a BET specific surface area below 1.5 m²/g, and a tap density exceeding 1.0 g/cm³, supporting efficient electrode compaction. Electrochemical testing demonstrates an initial reversible capacity of 362.2 mAh/g and a first-cycle Coulombic efficiency of 92.7%, indicating good capacity retention and low irreversible loss. Low magnetic impurity levels (Fe+Cr+Ni+Zn at 0.06 ppm) further enhance its suitability for high-performance cell assemblies. The material is supplied as a black powder, vacuum-sealed in aluminum-plastic film, and should be stored in a cool, dry environment. It is commonly used in experimental studies focusing on fast-charging anode formulations and high-rate battery performance evaluation.

High-rate fast charging

No.	Test Item		Unit	Specification	Measured Result
1	Magnetic Substances	Fe+Cr+Ni+Zn	(ppm)	≤0.1	0.06
2	Physical Properties	Particle Size Distribution - D10	(μm)	5.0±1.0	5.42
3		Particle Size Distribution - D50	(μm)	9.0±1.0	9.26
4		Particle Size Distribution - D90	(μm)	≤17.0	16.22
5		BET Specific Surface Area	(m²/g)	≤1.5	1.38
6		Tap Density (TD)	(g/cm³)	≥1.0	1.12
7		Ash Content	(%)	≤0.1	0.01
8	Electrochemical Performance	Initial Reversible Capacity	(mAh/g)	≥340.0	362.2
9	Electrochemical Performance	Initial Coulombic Efficiency	(%)	≥92.0	92.7

Particle morphology

The electrolyte used for testing is NCM electrolyte (KLD-1230C).

The range for compacting the electrode :

The electrode sheets are baked at 85°C for 4 hours, with a sealing pressure of 1300 psi.

D50 (um)	9.0+-1.5
Tap density (g/cm3)	1.05+-0.10
D10 (um)	5.0+-2.0
BET (m2/g)	1.40+-0.30
D90 (um)	15.5+-3.0

Appearance: Black powder; uniform color, free of clumps and foreign matter.
Packaging Requirements: Vacuum-sealed in aluminum-plastic film; outer packaging consists of a plastic bag.
Storage Requirements: Keep sealed; store in a cool, dry place.

Note: CC — Constant Current Charging; DC — Constant Current Discharging; CV — Constant Voltage Charging.