Double Planetary Vacuum Mixer (30 L)

Double Planetary Vacuum Mixer (30 L)

Model：
CAN-MIX13-0030LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:42:02
Equipment Size：
L1660mm* W900mm * H1700mm
Weight：
1300kg

Details

This double planetary vacuum mixer, with a 30-liter working capacity, is developed for preparing high-viscosity electrode slurries used in cylindrical and pouch cell production lines. Its dual-planetary agitation system ensures homogeneous mixing and de-agglomeration of active materials, conductive agents, and binders under vacuum conditions, effectively eliminating air bubbles and improving slurry consistency. The sealed design minimizes solvent evaporation and contamination, supporting repeatable batch processing for research and pilot-scale manufacturing. Common applications include cathode and anode slurry preparation for lithium-ion batteries, where precise control over viscosity and particle dispersion is critical. This model delivers reliable performance for battery material labs and small-volume production environments requiring consistent mixing quality.
Volume (L)
Design volume 40L, use volume 8-30L
operating environment
room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around
Equipment weight
About 1.3 tons
power
about 7.75kW
equipment size
L1660mm * W900mm * H1700mm
Site bearing
Ground bearing requirement ≥ 1200kg/m
power supply
AC:3*380V, 50HZ
window port
DN80
Vacuum Pressure Preservation
Static 12H Vacuum Leakage Rate ≤ 10%
Dispersion Speed
0~5500 r/min, Frequency Conversion Speed Regulation
equipment capacity
equipment failure rate ≤ 2%
Not Applicable
Acetone Solvent
stirring mode
double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power
5.5kW
cold and hot water
temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet
safety protection function
1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port
DN25 ball valve controls discharge port
spotlight window
DN80
lower barrel cooling circulating water inlet and outlet
DN15
Compressed air
Interface Φ8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min)
Applicable Slurry
Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Feeding Port 1
DN80 Clamp Type
Stirring paddle speed
5~55 r/min, frequency conversion speed regulation
equipment bearing temperature
7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Applicable Powder
PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Vacuum
Interface DN155(<-0.096MPa, flow rate> 0.3 m/min)
Feeding port 2
DN15 clamp type
Nitrogen
Interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min)
revolution speed
0~27 r/min
revolution motor power
4kW
Agitator Payload
≧ 3Nm/cm
lifting motor power
0.75kW
Applicable Additives
SBR, CNT, etc.

& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system


1. adopt the intelligent control of the control panel or the central control system


Precisa de suporte R&D?

Explore categorias principais de produtos e ligue materiais de bateria aos servicos R&D da Canrd.

Materiais experimentais

Categoria

Catodos, anodos, eletrolitos, separadores e outros materiais para investigacao de baterias.

Comprar materiais de catodo, anodo e eletrolito →

Equipamento de laboratorio

Categoria

Equipamento de laboratorio de baterias para linhas piloto, fixtures e fluxos de teste.

Ver equipamento de laboratorio de baterias →

Eletrodos e celulas

Categoria

Eletrodos personalizados, celulas secas e componentes de celulas para validacao R&D.

Ver eletrodos e celulas de bateria personalizados →

Eletrolito de sodio

Categoria

Opcoes de eletrolito de ioes de sodio para investigacao e validacao de baterias de sodio.

Comprar eletrolitos de bateria de sodio →

Servicos R&D

Servico

Servicos completos de R&D de baterias, da avaliacao de materiais a fabricacao de celulas e analise de falhas.

Explorar servicos R&D da Canrd →

Avaliacao de materiais

Servico

Caracterizacao, testes eletroquimicos e avaliacao de compatibilidade para materiais de bateria.

Avaliar os seus materiais de bateria →

Fabricacao de eletrodos

Servico

Folhas e rolos de eletrodos personalizados conforme a quimica e processo alvo.

Solicitar fabricacao de eletrodos →

Fabricacao de celulas

Servico

Celulas secas, celulas montadas e formatos personalizados para validacao R&D.

Construir celulas de investigacao personalizadas →

Contacto

Pagina

Peca a Canrd para combinar produtos, materiais e servicos para o seu projeto.

Obter suporte de produto e R&D →