Double planetary vacuum mixer (1L)

Name: Double planetary vacuum mixer (1L)
Brand: Canrud
Availability: InStock

Model：

CAN-MIX13-0001LV

Applied range：

Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.

Date issued：

2024-12-27 03:43:37

Equipment Size：

L616mm* W430mm * H874mm

Weight：

300kg

Details

Overview

Specifications

Details

This product is designed for laboratory-scale blending and mixing of advanced battery materials, particularly suited for cylindrical and pouch cell research applications. Equipped with a double planetary mixing mechanism and a 1-liter working capacity, it enables homogeneous dispersion of high-viscosity slurries and electrode pastes under vacuum conditions. The mixer supports precise control over mixing speed and vacuum level, which helps minimize air entrapment and enhance material uniformity. Typical use scenarios include preparing cathode and anode slurries for small-batch electrode coating trials, as well as formulating electrolyte or conductive additive mixtures. Its compact footprint and robust construction make it a practical tool for R&D labs focused on battery material optimization and process development.

volume	design volume 1.5L; service volume 0.5 ~ 1L
equipment weight	about 0.3 tons
operating environment	room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around
site bearing	ground bearing requirement ≥ 500kg/m
power	about 1.5kW
equipment size	L616mm * W430mm * H874mm
power supply	AC:3*380V, 50HZ

applicable additives	SBR, CNT, etc.
lifting motor power	hand lifting
discharge port	DN15 ball valve controls discharge port
not applicable	acetone solvent
equipment bearing temperature	7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
equipment capacity	equipment failure rate ≤ 2%
dispersion motor power	0.75kW
nitrogen	interface DN10(0.2~0.5MPa, nitrogen flow rate> 0.3~3 m/min)
mixing paddle payload	≧ 3nm/cm
applicable slurry	viscosity: 1,000~100000 MPa.s, solid content: 30% ~ 70%, and 85% ~ 100
stirring method	double spiral stirring paddle and double dispersion shaft (four dispersion discs)
revolution speed	0~40 r/min
revolution motor power	0.75kW
vacuum	interface DN10(<-0.096MPa, flow> 2~3 m/min)
safety protection function	1. acousto-optic warning function: acousto-optic alarm for stirring barrel lifting; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot rise and fall when the mixer is working; 4. Vacuum function: the upper and lower barrels cannot be separated with vacuum; 5. Electrical protection: emergency stop protection for operators, grounding protection for equipment and automatic shutdown alarm for power overload; 6. Phase sequence fault alarm for power supply.
dispersion speed	0~9000 r/min, frequency conversion speed regulation
window port	DN50
vacuum pressure maintaining	static 12H vacuum leak rate ≤ 15%
applicable powder	PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
mixing paddle rotation speed	0~86 r/min, frequency conversion speed regulation
inlet and outlet of circulating cooling water of lower barrel	DN10