R&D Services

Material Evaluation & Testing、Electrode Fabrication、Cell Fabrication、Electrical & Safety Testing、Failure & Root Cause Analysis

Solid-State Battery Test Mold with Pressure Display CAN-02-YP

Name: Solid-State Battery Test Mold with Pressure Display CAN-02-YP
Brand: Canrd
Price: 1344.08 USD
Availability: InStock

$1344.08

Numéro d'article:MA-CM-TO-008201

Spécifications

✓ Sélectionné: 10mm

Assurance qualité

Vente directe usine

Livraison mondiale

Details

Aperçu

Spécifications

Détails

This product is designed for solid-state battery research, specifically for preparing and testing pelletized electrolyte or electrode materials under controlled pressure. The mold integrates a pressure display sensor with 0.1%–0.3% accuracy and supports real-time data logging via host software, enabling precise monitoring during compaction. Constructed with a PPS exterior and a ceramic or PEEK liner, the assembly offers high hardness, wear resistance, and dimensional stability suitable for repeated use. The pressurization process is carried out inside a glove box, with a sealing fixture allowing the compressed pellet to be transferred to a normal environment for subsequent testing without pressure loss. Mold diameters from 10 mm to 25 mm are available, and custom material options include stainless steel (gold-plated) or titanium. Typical applications include solid electrolyte compaction, battery assembly parameter optimization, and electrochemical characterization of solid-state batteries.

Solid state battery insulation mold description

1. The mold and the powder tablet press are used together,

2. The insulating mold is made of PPS material to protect the exterior parts and ceramic (or PEEK) liner, which has the characteristics of high hardness, good toughness, excellent finish, accurate accuracy, long life, and convenient replacement of wearing parts.

Installation and pressurization process:

In the glove box, the mold sleeve is placed on the bottom of the mold, and the tablet press spiral screw is rotated down until it is pressed against the pressure bar. After the required pressure is added, the top screw of the transfer fixture is tightened again to achieve the sealing effect, and the glove box is removed for testing in a normal environment. (can also apply a small amount of vacuum grease or petroleum jelly to the gap between the pressing bar and the inner mold sleeve, and then take out the glove box for testing)

Notes:

1. When using the mold, the limit of the maximum working pressure of the abrasive tool must be observed.

2. Exceeding the working limit pressure will cause damage to the abrasive, and the maximum working pressure of the abrasive tool of different diameters is different;

3. After the mold is used, the mold should be cleaned and dried, and the inside of the mold and the mold should be protected by lubricating grease to prevent surface oxidation and corrosion, and then placed in a dry and closed environment for maintenance.

4. The solid-state battery test abrasive is used in the characteristics test of the solid-state battery, the insulating abrasive is stuck with a transfer fixture in the glove box, put it in the tablet press to press to the appropriate pressure, tighten the screws on the fixed abrasive, and take out the transfer fixture and the insulating abrasive together for testing.

Mould diameter: 10-16 mm can be customized

Sensor range: 0-10 T optional

Sensor accuracy: 0.1%-0.3%

Mold material: stainless steel (gold-plated), titanium can be customized

(Note: In addition, it can be used with the host computer software to record the pressure change data in real time, with a maximum frequency of 1 time/2s)

Note: The inner diameter size supports the range of 10-25mm, and the price remains the same
The 10mm specification will basically be in stock, and it can be sent within 5 days after the payment
Specifications above 10mm, futures - 2 weeks, please consult customer service for details