Lithium-ion Battery Anode Electrode Sheet (Gr Fast-Charging Graphite Anode SM04)

Name: Graphite Oxide Aqueous Dispersion GOs-325
Brand: Canrd
Price: 78.53 USD
Availability: InStock

$45.31

Numéro d'article:SM04XX

Spécifications

✓ Sélectionné: single-sided 5 pcs/pack (Uncalendered)

Quantité

Assurance qualité

Vente directe usine

Livraison mondiale

Details

1. Store in a vacuum or inside a glove box, using double-layered zip‑lock bags; improper storage, especially for high‑nickel and sodium‑ion cathode materials, can lead to an increase in the battery’s internal resistance. 2. If the electrode sheets have not been calendered, they should be calendered according to the recommended compaction density. 3. The coating mass per unit area must be determined based on the actual measured weight; it does not include the current collector. 4. To calculate the active‑material mass (mg) from the measured weight: (weight of the small disc, mg) – (current‑collector mass per unit area, mg/cm² × area of the small disc, cm²) × active‑material fraction. 5. The theoretical active‑material mass (mg) = coating mass per unit area (mg/cm²) × active‑material fraction × area of the small disc (cm²). 6. Theoretical areal capacity (mAh/cm²) = coating mass per unit area (mg/cm²) × active‑material fraction × specific capacity (mAh/g) ÷ 1000. 7. When calculating specific capacity, use the active‑material mass determined by the actual measured weight; due to tolerances in the coating mass per unit area, the measured value shall prevail. 8. Creasing: After calendering, single‑sided electrodes tend to curl; flattening and packaging may result in creases.

Canrd	10*10cm		5 sheets/pack			Coating
NO.	Electrode Name	Model	Main Material	Active Material Capacity (mAh/g)	Loading	Areal Density (mg/cm²)	Areal Capacity (mAh/cm²)
1	NCA Electrode	SY51	NCA-S (Nickel Cobalt Aluminum Oxide)	195	94.50%	17.66	3.25
2	Ni90 Electrode	SY41	Ni90 Single Crystal NCM	195	94.50%	9.50	1.75
3	NCM811 Electrode	SY33	NCM811 Single Crystal	188	94.50%	9.20	1.63
4	NCM811 Electrode	SY34	—	188	94.50%	21.50	3.82
5	NCM622 Electrode	SY25	NCM622 Single Crystal-B	168	96.70%	10.00	1.62
6	NCM622 Electrode	SY24	—	168	96.70%	21.60	3.51
7	NCM523 Electrode	SY15	NCM523	165	94.00%	19.70	3.06
8	NCM523 Electrode	SY13	NCM523	165	94.00%	10.50	1.63
9	LCO Electrode	LC02	High Voltage Lithium Cobalt Oxide-Z-4.45V	178	96.40%	10.00	1.72
10	LRM Electrode	FL01	Lithium-rich Manganese-based-E	280	95.00%	5.96	1.59
11	Graphite Electrode	SM02	Natural Graphite (Standard)-A	340	95.70%	5.80	1.89
12	Fast Charging Graphite Electrode	SM04	Fast Charging Graphite-B	350	96.70%	5.60	1.90
13	Silicon Carbon Electrode	SC02	Silicon Carbon Anode 1800 (Porous Carbon Deposited Silicon)	420	95.00%	4.80	1.92
14	NFM Electrode	NT02	Sodium Nickel Iron Manganese Oxide	127	95.50%	12.27	1.49
15	NFM Electrode	NT03	—	127	95.50%	8.00	0.97
16	Hard Carbon Electrode	YT02	Imported Hard Carbon (5 μm)	300	95.50%	6.00	1.72
17	LFP Electrode	LF07	Lithium Iron Phosphate (High Compaction Density)	150	91.50%	12.30	1.69
18	LNMO Electrode	NM01	High Voltage Lithium Nickel Manganese Oxide-B	130	96.00%	7.50	2.00
19	NFPP Electrode	NF01	Sodium Iron Phosphate Pyrophosphate	100	93.50%	15.30	1.43
20	Vanadium Pentoxide Electrode	VO02	Vanadium Pentoxide	300	80.00%	5.00	1.20
21	Manganese Dioxide Electrode	MO01	Manganese-based or Vanadium-based Material	100	80.00%	5.00	/
22	Zinc Negative Electrode	ZA01	Pure Zinc Powder / Alloy Zinc Powder	/	70.0%–96.0%	5.0–15.0	/

MOQ for Custom Small Electrode Sheets: 10*10cm/pcs，5cs/pack，1pack

To place an order or request a quotation, please Contact Us.

Half-cell Testing

During electrode‑sheet slitting, slight material loss occurs at the edges, as shown in the figure below.
Cutting recommendations:
1. When punching, position the foil side toward the die edge and keep the coated side away from it;
2. Use a punch with a sharp blade;
3. If the punch blade is dull, try placing a sheet of weighing paper underneath during punching.

 .35
 *10
 (Smooth Copper Foil)
 .7%
 SY13(1.16);SY25(1.17);SY33(1.16);LF06(1.12);LC02(1.10);FL01(1.20)
 .10-1.50(Compacted density is not provided for uncalendered electrode sheets, please calculate independently)
 Fast-Charging Graphite-B
 Copper Foil
 months (stored under vacuum-sealed conditions), use within one month after opening.
 KLD-1230C
 Lithium-ion Battery Anode Electrode Sheet (Gr Fast-Charging Graphite Anode SM04)
 SM04XX
 (0.005-2.00V)
 At 25°C, rest for 4 h, discharge at constant current rates of 0.10C, 0.09C, 0.08C, 0.07C, 0.06C, 0.05C, 0.04C, 0.03C, 0.02C, and 0.01C to 0.005 V, respectively. Rest for 3 min, then charge at a constant current rate of 0.1C to 2.00 V, followed by a 3 min rest
 °C, 0.10/0.09/0.08/0.07/0.06/0.05/0.04/0.03/0.02/0.01C DC to 0.005 V, 0.1C CC to 2.00 V
 .90
 .60(Tolerance: ±2.0%)
 . If the electrode sheet has not been calendered, it is generally recommended to perform calendering before punching and drying. (The compacted density can refer to the minimum value listed in the “Compacted Density” section of this table.)
2. Drying condition: 85–105°C for 4 h (for vacuum drying, perform two gas exchanges during drying).
3. The active material mass should be determined based on the actual weight of each punched electrode disc.

Packaging, Transportation & Storage:

1. Vacuum preservation or glove box storage is recommended. Use self-sealing bags with two-layer packaging. This is especially important for high-nickel and sodium-ion electrode materials, as improper storage may cause increased internal resistance of the battery cell.
2. For uncalendered electrode sheets, calendering should be performed according to the recommended compacted density before further processing.
3. The coating areal loading should be determined based on the actual weighing results. The coating areal loading does not include the current collector mass.
4. Actual active material mass (mg) = (Weight of punched electrode disc (mg) − Current collector areal density (mg/cm²) × Area of punched electrode disc (cm²)) × Active material ratio
5. Theoretical active material mass (mg) = Coating areal loading (mg/cm²) × Active material ratio × Electrode disc area (cm²)
6. Theoretical areal capacity (mAh/cm²) = Coating areal loading (mg/cm²) × Active material ratio × Specific capacity (mAh/g) ÷ 1000
7. The capacity calculation should be based on the actual active material mass calculated from the actual weight measurement. Due to coating areal loading tolerances, the actual measured weight should be used as the reference.
8. Folding: Single-sided electrode sheets are more prone to curling after calendering. Improper packaging may cause folding or deformation.

Lithium-ion Battery Anode Electrode Sheet (Gr Fast-Charging Graphite Anode SM04)

Details

Besoin de support R&D ?

Materiaux experimentaux

Equipement de laboratoire

Electrodes et cellules

Electrolyte sodium

Services R&D

Evaluation de materiaux

Fabrication d electrodes

Fabrication de cellules

Contact