Double planetary vacuum mixer (60L)
Model：
CAN-MIX13-0060LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:41:45
Equipment Size：
L1820mm* W1280mm * H1985mm
Weight：
1900kg
Details
This product is designed for efficient and homogeneous mixing of high-viscosity materials, particularly in battery electrode slurry preparation. The CAN-MIX13-0060LV is a 60-liter double planetary vacuum mixer developed by Canrd, suitable for both cylindrical and pouch cell manufacturing lines. Its dual planetary motion and vacuum environment ensure thorough dispersion and deaeration, essential for consistent coating quality in lithium-ion battery production. The mixer handles a variety of formulations, from cathode and anode slurries to conductive pastes, with reliable sealing and clean operation. With robust construction and a 60-liter working capacity, it supports batch processing in pilot or small-scale production. This unit integrates easily into existing mixing and coating processes, providing controlled mixing parameters for research and development as well as routine production.
Volume (L) | design volume 80L, operating volume 20-60L |
equipment weight | About 1.9 tons |
operating environment | room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around |
power | about 13.75kW |
equipment size | L1820mm * W1280mm * H1985mm |
Site bearing | Ground bearing requirement ≥ 1200kg/m |
applicable additives | SBR, CNT, etc. |
window port | DN80 |
Feeding port 1 | DN125 clamp type |
Dispersion Speed | 0~4400 r/min, frequency conversion speed regulation |
equipment capacity | equipment failure rate ≤ 2% |
Not Applicable | Acetone Solvent |
stirring mode | double spiral stirring paddle and double dispersion shaft (four dispersion discs) |
Applicable powder | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc. |
dispersion motor power | 7.5kW |
cold and hot water | temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet |
safety protection function | 1. acousto-optic warning function: acousto-optic alarm for mixing barrel to rise and fall; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot rise and fall when the mixer is working; 4. Vacuum function: the upper and lower barrels cannot be separated with vacuum; 5. Electrical protection: emergency stop protection for operators, grounding protection for equipment, automatic shutdown alarm for power overload; 6. Phase sequence fault alarm for power supply. |
discharge port | DN25 ball valve controls discharge port |
spotlight window | DN80 |
lower barrel cooling circulating water inlet and outlet | DN15 |
Compressed air | Interface Φ8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min) |
Applicable Slurry | Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100 |
Stirring paddle speed | 0~47 r/min, frequency conversion speed regulation |
Lower Barrel Cooling Circulating Water Pressure Relief Port | DN10 |
equipment bearing temperature | 7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water |
Vacuum pressure holding | Static 12H vacuum leak rate ≤ 20% |
Vacuum | Interface DN155(<-0.096MPa, flow rate> 0.3 m/min) |
Feeding port 2 | DN25 clamp type |
Nitrogen | Interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min) |
revolution speed | 0~33 r/min |
revolution motor power | 5.5kW |
Agitator Payload | ≧ 3Nm/cm |
lifting motor power | 0.75kW |
& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system
1. adopt the intelligent control of the control panel or the central control system
Need R&D Support?
Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrud R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrud to match products, materials, and services for your project.
Get product and R&D support →