Syringe Membrane Filter (PTFE)

Jinteng Φ13mm Syringe Membrane Filter Application:

It is mainly used for sample pre-filtration, clarification, and sterilization of particles, liquid, and gas. It is the preferred method for filtering HPLC and GC samples, ensuring stable and continuous analysis results, protecting chromatographic columns, and prolonging the lifetime of the columns. It is also widely used in weight analysis, trace analysis, colloid separation, and sterile testing. It is suitable for sample preparation, purification, pre-treatment, and biological product preparation in HPLC, MS, LC-MS, GC-MS, etc. It can be used for filtering liquid samples such as tissue culture media, microbial media, buffer solutions, etc., purifying and clarifying corrosive solutions, filtering small amounts of samples, removing impurities and precipitates from samples.

Jinteng Φ13mm Syringe Membrane Filter Features:

1. The housing is made of sanitary-grade polypropylene with low dissolution and excellent chemical stability. It is ultrasonically welded, with tight edge binding, no leakage, and high pressure resistance.

2. The syringe filter is the fastest and most effective method for filtering trace samples, without the need to change the membrane or clean the filter, saving a lot of time.

3. The product uses imported high-quality microporous membranes, with minimal sample adsorption, ensuring maximum recovery of small or high-value samples, thus reducing waste.

4. The standard interface is convenient for connection with various syringes, and can also be directly connected with the needle of the 7725 valve for direct injection after filtering.

5. This product is specially designed to withstand burst pressures of up to 8 bar.

New high-end syringe

1. Mechanized production, European production line, the production equipment realizes a one-line production from film cutting, film loading, welding, testing, printing, and packaging without manual contact; the production process reduces bacterial and human interference. Usually, even sterilized products on the market cannot achieve aseptic effect. The main reason is that some substances such as grease, salt, protein, bacteria, and microorganisms on the hands of manual operators will contaminate the syringe filter.

2. Ultrasonic welding has high welding strength, firm bonding, and good sealing, making our products able to withstand higher pressures. Ultrasonic welding can also achieve moisture and water resistance; and the welding process does not produce pollution, nor does it cause high-temperature pollution to the welding materials, greatly reducing the pollution in the syringe production process.

3. Independent sealed packaging to prevent post-production contamination and facilitate use.