Solid-State Battery Pressure Testing Mold CAN-09

Solid-State Battery Pressure Testing Mold CAN-09

$286.94
Número de artículo:MA-CM-TO-008401
✓ Seleccionado: 12mm
Garantía de calidad
Venta directa de fábrica
Envío mundial

Details

This product is designed for researchers working on solid-state battery assembly and electrochemical testing, serving as a specialized pressure testing mold (model MA-CM-TO-0084) that integrates with powder tablet presses for film formation. Constructed with a stainless steel outer frame and a removable ceramic Al2O3 or PEEK liner, the mold features a 12 mm inner diameter cavity and a maximum working pressure of 600 MPa, enabling realistic simulation of charge-discharge cycles and electrochemical performance in solid-state cells. Its components are machined for improved flatness and smoothness, facilitating easy assembly and disassembly. For air-sensitive battery materials, the entire fabrication and testing process can be performed within a glove box or airtight dry container. This tool is well-suited for evaluating pressure-dependent interfacial behavior and material stability in solid-state battery research.

Solid state battery insulation mold description
1. In the process of filming, the mold and the powder tablet press are used together.

2. If the battery material is sensitive to moisture or oxygen, the whole process of assembling the solid-state battery needs to be operated in the glove box. After the battery is assembled, it should be tested in a glove box or an airtight dry container. Notes:

1. When using the mold, the limit of the maximum working pressure of the abrasive must be observed;

2. Exceeding the working limit pressure will cause damage to the abrasive, and the maximum working pressure of the abrasive tool of different diameters is different;

3. After the mold is used, the mold should be cleaned and dried, and the inside of the mold and the mold should be protected by lubricating grease to prevent surface oxidation and corrosion, and then placed in a dry and closed environment for maintenance.

image.png

Material Specifications
1. Mold components: stainless steel outer frame, ceramic Al2O3 or PEEK liner, mold steel ejector rod, PEEK insulating screw gasket.

2. Liner specifications: ceramic Al2O3 or PEEK inner tank with an outer diameter of 25.0mm and a height of 18.0mm.

3. Inner diameter of the inner tank: 12mm. (Note: Ceramic Al2O3 fixed 10.0mm, PEEK diameter can be customized)

4. Overall specification: device mold Φ50.0*93.7mm.

Compression test
1. The maximum pressure of the mold can reach 600MPa.

2. The pressure of the press to 1 ton is about equal to the pressure of 125MPa. (10mm cavity diameter)

Test functionality
1. Simulate the charge and discharge cycle test of solid-state battery.

2. Simulate the electrochemical performance test of solid-state batteries.

Advantage
1. Easy to assemble and disassemble.

2. Compression column, gasket, mold bottom, and grinding machine treatment for better flatness and smoothness.

Futures ~ 2 weeks, please contact customer service for details.

Necesitas soporte R&D?

Explora categorias clave de productos y conecta materiales de bateria con los servicios R&D de Canrd.

Materiales experimentales

Categoria

Catodos, anodos, electrolitos, separadores y otros materiales para investigacion de baterias.

Comprar materiales de catodo, anodo y electrolito →

Equipos de laboratorio

Categoria

Equipos de laboratorio de baterias para lineas piloto, utillajes y flujos de prueba.

Ver equipos de laboratorio de baterias →

Electrodos y celdas

Categoria

Electrodos personalizados, celdas secas y componentes de celdas para validacion R&D.

Ver electrodos y celdas de bateria personalizados →

Electrolito de sodio

Categoria

Opciones de electrolito de ion sodio para investigacion y validacion de baterias de sodio.

Comprar electrolitos de bateria de sodio →

Servicios R&D

Servicio

Servicios completos de R&D de baterias, desde evaluacion de materiales hasta fabricacion de celdas y analisis de fallos.

Explorar servicios R&D de Canrd →

Evaluacion de materiales

Servicio

Caracterizacion, pruebas electroquimicas y evaluacion de compatibilidad para materiales de bateria.

Evaluar tus materiales de bateria →

Fabricacion de electrodos

Servicio

Laminas y rollos de electrodos personalizados segun tu quimica y proceso objetivo.

Solicitar fabricacion de electrodos →

Fabricacion de celdas

Servicio

Celdas secas, celdas ensambladas y formatos personalizados para validacion R&D.

Construir celdas de investigacion personalizadas →

Contacto

Pagina

Pide a Canrd combinar productos, materiales y servicios para tu proyecto.

Obtener soporte de producto y R&D →