Double Planetary Vacuum Mixer (200 L)

Double Planetary Vacuum Mixer (200 L)

Model：
CAN-MIX13-0200LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:41:07
Equipment Size：
L2700mm* W1360mm * H2810mm
Weight：
5200kg

Details

This product is designed for homogeneous mixing of high-viscosity materials in battery electrode slurry preparation. Operating as a double planetary vacuum mixer with a 200L working capacity, it ensures thorough blending under controlled vacuum conditions, which helps minimize air entrapment and improve slurry consistency. Suitable for both cylindrical and pouch cell production lines, this equipment supports the material processing requirements of advanced battery manufacturing. Its robust construction and vacuum system are tailored for research and industrial-scale applications where reproducible mixing quality is essential.
Volume (L)
design volume 265L, operating volume 200L
equipment weight
About 5.2 tons
operating environment
room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around
power
about 45.5kW
equipment size
L270mm * W1360mm * H2810mm
Site bearing
Ground bearing requirement ≥ 1500kg/m
applicable additives
SBR, CNT, etc.
window port
DN100
Feeding port 1
DN125 clamp type
Dispersion Speed
0~2800 r/min, frequency conversion speed regulation
equipment capacity
equipment failure rate ≤ 2%
Feeding port 3
DN50 clamp type
Not Applicable
Acetone Solvent
stirring mode
double spiral stirring paddle and double dispersion shaft (four dispersion discs)
Applicable powder
PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
dispersion motor power
22kW
cold and hot water
temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out
safety protection function
1. acousto-optic warning function: acousto-optic alarm for mixing barrel lifting; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot rise and fall when the mixer is working; 4. Vacuum function: the upper and lower barrels cannot be separated with vacuum; 5. Electrical protection: emergency stop protection for operators, grounding protection for equipment, automatic shutdown alarm for power overload; 6. Phase sequence fault alarm for power supply.
discharge port
DN40 ball valve controls discharge port
spotlight window
DN100
lower barrel cooling circulating water inlet and outlet
DN25
nitrogen
Interface DN20(0.2~0.5MPa, nitrogen flow rate> 0.3~3 m/min)
Compressed air
Interface Φ8 air pipe (0.4~0.6MPa)
Applicable Slurry
Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Stirring paddle speed
0~46 r/min, frequency conversion speed regulation
Lower Barrel Cooling Circulating Water Pressure Relief Port
DN10
equipment bearing temperature
7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Vacuum pressure holding
Static 12H vacuum leakage rate ≤ 20%
Vacuum
Interface DN20(<-0.096MPa, flow rate> 2~3 m/min)
Feeding port 2
DN100 clamp type
revolution speed
0~39 r/min
revolution motor power
22kW
Feeding port 4
DN40 clamp type
Agitator Payload
≧ 3Nm/cm
lifting motor power
1.5kW

& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system


1. adopt the intelligent control of the control panel or the central control system


Necesitas soporte R&D?

Explora categorias clave de productos y conecta materiales de bateria con los servicios R&D de Canrd.

Materiales experimentales

Categoria

Catodos, anodos, electrolitos, separadores y otros materiales para investigacion de baterias.

Comprar materiales de catodo, anodo y electrolito →

Equipos de laboratorio

Categoria

Equipos de laboratorio de baterias para lineas piloto, utillajes y flujos de prueba.

Ver equipos de laboratorio de baterias →

Electrodos y celdas

Categoria

Electrodos personalizados, celdas secas y componentes de celdas para validacion R&D.

Ver electrodos y celdas de bateria personalizados →

Electrolito de sodio

Categoria

Opciones de electrolito de ion sodio para investigacion y validacion de baterias de sodio.

Comprar electrolitos de bateria de sodio →

Servicios R&D

Servicio

Servicios completos de R&D de baterias, desde evaluacion de materiales hasta fabricacion de celdas y analisis de fallos.

Explorar servicios R&D de Canrd →

Evaluacion de materiales

Servicio

Caracterizacion, pruebas electroquimicas y evaluacion de compatibilidad para materiales de bateria.

Evaluar tus materiales de bateria →

Fabricacion de electrodos

Servicio

Laminas y rollos de electrodos personalizados segun tu quimica y proceso objetivo.

Solicitar fabricacion de electrodos →

Fabricacion de celdas

Servicio

Celdas secas, celdas ensambladas y formatos personalizados para validacion R&D.

Construir celdas de investigacion personalizadas →

Contacto

Pagina

Pide a Canrd combinar productos, materiales y servicios para tu proyecto.

Obtener soporte de producto y R&D →