Double Planetary Vacuum Mixer (15 L)

Double Planetary Vacuum Mixer (15 L)

Model：
CAN-MIX13-0015LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:42:19
Equipment Size：
L1660mm* W900mm * H1700mm
Weight：
1200kg

Details

This product is developed for advanced battery material processing, specifically designed for mixing viscous slurries used in cylindrical and pouch cell production lines. The CAN-MIX13-0015LV double planetary vacuum mixer, with a 15-liter working capacity, employs a dual-blade planetary motion system combined with vacuum operation to achieve homogeneous mixing, de-agglomeration, and air removal in electrode slurries. Its key technical characteristics include efficient dispersion of conductive additives and binders, ensuring consistent slurry rheology essential for coating uniformity. Common applications include preparing cathode and anode slurries for lithium-ion batteries, as well as mixing other high-viscosity materials in research and pilot-scale production. The integrated vacuum function minimizes gas entrapment, improving electrode density and electrochemical performance. This equipment is suitable for laboratory and small-batch manufacturing environments seeking reliable, repeatable mixing results.
Volume (L)
Design Volume 25L Operating Volume 15L
Equipment Size
L1660mm * W900mm * H1700mm
Site Bearing
Ground load-bearing requirement ≥ 1200kg/m²
Operating Environment
regular Environment
Power
About 7.75kW
Power Supply
AC:3*380V, 50HZ
Equipment Weight
About 1.2 Tons
window port
DN80
Dispersion Speed
0~5500 r/min, Frequency Conversion Speed Regulation
equipment capacity
equipment failure rate ≤ 2%
Not Applicable
Acetone Solvent
stirring mode
double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power
3kW
cold and hot water
temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet
safety protection function
1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port
DN25 ball valve controls discharge port
spotlight window
DN80
lower barrel cooling circulating water inlet and outlet
DN15
vacuum
interface DN155(<-0.096MPa, flow rate> 0.3 m/min)
nitrogen
interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min)
applicable powder
PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Compressed air
Interface &Phi;8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min)
Applicable Slurry
Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Stirring paddle speed
5~55 r/min, frequency conversion speed regulation
equipment bearing temperature
7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Feeding port 2
DN15 clamp type
revolution speed
0~27 r/min
revolution motor power
3kW
vacuum pressure maintaining
static 12H vacuum leakage rate &le; 10%
Agitator Payload
≧ 3Nm/cm
lifting motor power
0.75kW
Applicable Additives
SBR, CNT, etc.
feeding port 1
DN80 clamp type

& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system


1. adopt the intelligent control of the control panel or the central control system


Necesitas soporte R&D?

Explora categorias clave de productos y conecta materiales de bateria con los servicios R&D de Canrd.

Materiales experimentales

Categoria

Catodos, anodos, electrolitos, separadores y otros materiales para investigacion de baterias.

Comprar materiales de catodo, anodo y electrolito →

Equipos de laboratorio

Categoria

Equipos de laboratorio de baterias para lineas piloto, utillajes y flujos de prueba.

Ver equipos de laboratorio de baterias →

Electrodos y celdas

Categoria

Electrodos personalizados, celdas secas y componentes de celdas para validacion R&D.

Ver electrodos y celdas de bateria personalizados →

Electrolito de sodio

Categoria

Opciones de electrolito de ion sodio para investigacion y validacion de baterias de sodio.

Comprar electrolitos de bateria de sodio →

Servicios R&D

Servicio

Servicios completos de R&D de baterias, desde evaluacion de materiales hasta fabricacion de celdas y analisis de fallos.

Explorar servicios R&D de Canrd →

Evaluacion de materiales

Servicio

Caracterizacion, pruebas electroquimicas y evaluacion de compatibilidad para materiales de bateria.

Evaluar tus materiales de bateria →

Fabricacion de electrodos

Servicio

Laminas y rollos de electrodos personalizados segun tu quimica y proceso objetivo.

Solicitar fabricacion de electrodos →

Fabricacion de celdas

Servicio

Celdas secas, celdas ensambladas y formatos personalizados para validacion R&D.

Construir celdas de investigacion personalizadas →

Contacto

Pagina

Pide a Canrd combinar productos, materiales y servicios para tu proyecto.

Obtener soporte de producto y R&D →