Carbon-Coated Copper Foil
Carbon-Coated Copper Foil
Carbon-Coated Copper Foil

Carbon-Coated Copper Foil

$151.02
Número de artículo:MA-EN-CU-007101
✓ Seleccionado: Carbon-Coated Copper Foil — Single-Sided (8+1) μm × 263 mm (Coating Width: 232 mm) × 1 kg
Garantía de calidad
Venta directa de fábrica
Envío mundial

Details

This product, Canrd's coated carbon copper foil (model MA-EN-CU-0004), is developed as a specialized current collector for lithium-ion battery research and energy material experiments. Unlike conventional copper foil, it features a single-sided carbon coating approximately 1 μm thick, applied uniformly to enhance electrical conductivity, reduce internal resistivity, and improve mechanical toughness. The carbon layer also helps suppress burr-induced short circuits, strengthens adhesion of the electrode material, and supports higher discharge capacity over extended battery cycles. Available in rolls with a substrate thickness of 8 μm and a coating width of 232 mm, it is primarily intended for use as a negative electrode substrate in prototype cells or laboratory-scale battery assemblies. For smaller trial runs, sheet-form samples (~A4 size, 1 m² total area) are also offered. This foil balances practical handling with reliable performance for systematic electrode optimization studies.

 

 

Coated Carbon Copper Foil

Product Advantages：

Carbon-coated copper foil is a new type of battery anode substrate.

Compared with traditional copper foil, carbon-coated copper foil has better conductivity and lower internal resistivity, stronger mechanical properties and better toughness.

It can avoid short circuits caused by burrs, improve the adhesion of electrode materials, increase the discharge capacity of the battery and extend the service life of lithium-ion batteries.

Product Description and Suggestions：

Good coating uniformity and consistency, single-side coating thickness ~1μm.

The thickness in the specifications is calculated as substrate thickness * substrate width * roll weight.

Different roll weights indicate different lengths in meters.

Stock product specifications may differ from the data on the official website; please consult customer service for specific purchases.

The 1m2 product is in sheet form, approximately the size of an A4 paper.

Each shipment contains approximately a dozen sheets (with a total effective area of 1m2).

 

Necesitas soporte R&D?

Explora categorias clave de productos y conecta materiales de bateria con los servicios R&D de Canrd.

Materiales experimentales

Categoria

Catodos, anodos, electrolitos, separadores y otros materiales para investigacion de baterias.

Comprar materiales de catodo, anodo y electrolito →

Equipos de laboratorio

Categoria

Equipos de laboratorio de baterias para lineas piloto, utillajes y flujos de prueba.

Ver equipos de laboratorio de baterias →

Electrodos y celdas

Categoria

Electrodos personalizados, celdas secas y componentes de celdas para validacion R&D.

Ver electrodos y celdas de bateria personalizados →

Electrolito de sodio

Categoria

Opciones de electrolito de ion sodio para investigacion y validacion de baterias de sodio.

Comprar electrolitos de bateria de sodio →

Servicios R&D

Servicio

Servicios completos de R&D de baterias, desde evaluacion de materiales hasta fabricacion de celdas y analisis de fallos.

Explorar servicios R&D de Canrd →

Evaluacion de materiales

Servicio

Caracterizacion, pruebas electroquimicas y evaluacion de compatibilidad para materiales de bateria.

Evaluar tus materiales de bateria →

Fabricacion de electrodos

Servicio

Laminas y rollos de electrodos personalizados segun tu quimica y proceso objetivo.

Solicitar fabricacion de electrodos →

Fabricacion de celdas

Servicio

Celdas secas, celdas ensambladas y formatos personalizados para validacion R&D.

Construir celdas de investigacion personalizadas →

Contacto

Pagina

Pide a Canrd combinar productos, materiales y servicios para tu proyecto.

Obtener soporte de producto y R&D →