Benchtop Electrode Stacking Machine (Compatible with Separator Rolls and Sheets)

Model：

CAN-LAM52-0120DD

Applied range：

Thismachine is mainly used for the lamination of square lithium battery core.

Date issued：

2025-01-06 19:31:33

Equipment Size：

980*800*800mm

Weight：

190kg

Details

Descripción general

Especificaciones

Detalles

This desktop laminator, model CAN-LAM52-0120DD from Canrd, is designed for precise bonding of diaphragms in prismatic aluminum-case battery manufacturing. Compatible with both roll and sheet diaphragms, it supports flexible integration into winding/stacking assembly lines or other battery fabrication workflows. The compact desktop form factor facilitates research-scale or low-volume production where space efficiency is prioritized. Its construction emphasizes consistent lamination pressure and alignment control, ensuring uniform separator adhesion critical for cell safety and performance. While specific throughput parameters are not detailed, the unit is optimized for handling standard diaphragm materials used in lithium-ion cells. This laminator serves applications in electrode assembly prototyping, small-batch cell fabrication, and process development for energy storage systems.

Equipment Size	980800800mm
Power	2.5KW
Power Supply	AC220V/50Hz
Equipment Weight	190KG

Alignment accuracy of adjacent pole piece	± 0.25mm
qualified rate	98% (only caused by this machine, excluding incoming NG)
dynamic rate	95% (only caused by this machine)
equipment failure rate	≤ 3% (only caused by this machine)
equipment noise	≤ 75 db (measured 1 m away from the equipment)
vacuum source	vacuum pump of the equipment
Diaphragm head and tail alignment accuracy	± 0.5mm
Lamination layer number	can be set within the thickness adaptation range
Overall alignment accuracy of pole piece	± 0.3mm,CPK ≥ 1.33
change time	10~30 minutes
Center deviation of alignment accuracy between pole piece and diaphragm	Center deviation ± 0.3mm
Diaphragm end face alignment accuracy	± 0.3mm

This machine is mainly used for the lamination of square lithium battery cells.

1. Use the stacking table fixing type for stacking;

2. The positive and negative pressing claws are designed separately. The design of the pressing claws is reasonable. It can be adjusted arbitrarily within the specification range. The pressure is moderate. The pole pieces will not be crushed during the lamination process. Avoid cross infection and short circuit between positive and negative materials;

3. Servo motor is used to drive precision ball screw for positive and negative pole pieces and diaphragm handling mechanism, with accurate positioning;

4. it is equipped with positive and negative pole pieces and diaphragm positioning devices. the positioning plate is made of corresponding specifications according to the size of the pole piece, which is convenient to adjust;

5. take the battery and take the material automatically by hand, then take the battery manually and glue it manually;

6. The equipment has friendly interface, easy operation and simple maintenance;

7. The equipment can be compatible with the negative electrode, which is a copper-lithium composite tape (sheet) or a metal lithium tape (sheet), and only a single sheet can be placed at a time;

8. The equipment can be compatible with roll material diaphragm and sheet diaphragm;

9. the equipment electric control box (outside the glove box) is linked with the equipment through a closed aviation plug, which is convenient for the equipment to be put into the glove box for use.