Double Planetary Vacuum Mixer (300 L)

Double Planetary Vacuum Mixer (300 L)

Model：
CAN-MIX13-0300LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:40:51
Equipment Size：
L3040mm* W1610mm * H3110mm
Weight：
8500kg

Details

This product is a 300L double planetary vacuum mixer, developed for efficient and homogeneous mixing of high-viscosity materials in advanced battery manufacturing. Designed for both cylindrical and pouch cell production lines, it employs a dual planetary mechanism combined with vacuum operation to eliminate air bubbles and ensure thorough dispersion of active materials and binders. The 300-liter capacity supports medium-to-large scale batch processing, making it suitable for electrode slurry preparation and other precision compounding tasks. Built with robust construction and controlled mixing parameters, it helps maintain material consistency and process reliability. The equipment integrates seamlessly into automated production workflows, contributing to improved electrode quality and battery performance. This mixer is a practical choice for R&D and production environments requiring repeatable, high-shear mixing under controlled atmospheric conditions.
volume (l)
design volume 369L, operating volume 300L
equipment weight
about 8.5 tons
operating environment
room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH
site bearing
Ground load-bearing requirement ≥ 2000kg/m²
power
about 62kW
equipment size
L3040mm * W1610mm * H3110mm
window port
DN100
Vacuum Pressure Holding
Static 12H Vacuum Leakage Rate ≤ 20%
Dispersion Speed
0~2200 r/min, Frequency Conversion Speed Regulation
equipment capacity
equipment failure rate ≤ 2%
Not Applicable
Acetone Solvent
stirring mode
double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power
30kW
cold and hot water
temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out
safety protection function
1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port
DN40 ball valve controls discharge port
feed port 4
DN32 clamp type
compressed air
interface Φ 8 air pipe (0.4~0.6MPa)
feed port 2
DN150 clamp type
spotlight window
DN100
lower barrel cooling circulating water inlet and outlet
DN25
nitrogen
Interface DN20(0.2~0.5MPa, nitrogen flow> 0.3~3 m/min)
Applicable Slurry
Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%
Feeding Port 1
DN150 Clamp Type
Stirring paddle speed
0~44 r/min, frequency conversion speed regulation
Lower Barrel Cooling Circulating Water Pressure Relief Port
DN10
equipment bearing temperature
7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Applicable Powder
PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Vacuum
interface DN20(<-0.096MPa, flow rate> 2~3 m/min)
revolution speed
0~35 r/min
revolution motor power
30kW
feed port 5
DN32 clamp type
Agitator Payload
≧ 3Nm/cm
Applicable Additive
SBR, CNT, etc.
lifting motor power
1.5kW
feed port 3
DN40 Clamp Type

& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system


1. adopt the intelligent control of the control panel or the central control system


Benötigen Sie R&D-Unterstützung?

Entdecken Sie wichtige Produktkategorien und verbinden Sie Batteriematerialien mit Canrds R&D-Services.

Experimentelle Materialien

Kategorie

Kathoden, Anoden, Elektrolyte, Separatoren und weitere Materialien für Batterieforschung.

Kathoden-, Anoden- und Elektrolytmaterialien kaufen →

Laborgeräte

Kategorie

Batterielaborgeräte für Pilotlinien, Vorrichtungen und Testabläufe.

Batterielaborgeräte ansehen →

Elektroden und Zellen

Kategorie

Kundenspezifische Elektroden, Trockenzellen und Zellkomponenten für R&D-Validierung.

Kundenspezifische Batterieelektroden und Zellen ansehen →

Natrium-Elektrolyt

Kategorie

Natrium-Ionen-Elektrolyte für Natriumbatterieforschung und Validierung.

Natrium-Batterieelektrolyte kaufen →

R&D-Services

Service

Ganzheitliche Batterie-R&D-Services von Materialbewertung bis Zellfertigung und Fehleranalyse.

Canrd R&D-Services entdecken →

Materialbewertung

Service

Charakterisierung, elektrochemische Tests und Kompatibilitätsbewertung für Batteriematerialien.

Batteriematerialien bewerten lassen →

Elektrodenfertigung

Service

Kundenspezifische Elektrodenblätter und -rollen für Ihre Zielchemie und Prozessanforderungen.

Elektrodenfertigung anfragen →

Zellfertigung

Service

Trockenzellen, montierte Zellen und kundenspezifische Zellformate für R&D-Validierung.

Kundenspezifische Forschungszellen bauen →

Kontakt

Seite

Canrd kann Produkte, Materialien und Services passend zu Ihrem Projekt kombinieren.

Produkt- und R&D-Support erhalten →