spray dryer

spray dryer

Model：
CAN-SPD74-1500AS
Applied range：
Spraydrying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder, granular or block solid products from solution, emulsion, suspension and plastic paste liquid raw materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet precise criteria. Spray drying is an ideal process.
Date issued：
2024-12-23 21:27:16
Equipment Size：
W550mm* D650mm * H1300mm
Weight：
110kg

Details

This spray dryer, model CAN-SPD74-1500AS from Canrd, is developed for integration into dry electrode preparation lines, serving as a key piece of spray equipment in advanced battery material processing. It is designed to convert liquid precursors or slurries into fine, uniform dry powders through controlled atomization and hot gas contact, preserving material morphology and consistency. The unit supports research and production scale operations where moisture-sensitive electrode materials require gentle yet efficient drying. Its technical configuration is optimized for compatibility with solvent-based or aqueous formulations common in lithium-ion battery cathode and anode fabrication. While specific parameters are not detailed here, the model designation suggests a throughput capacity suited for pilot or small-scale manufacturing environments. This equipment is particularly relevant for laboratories and pilot lines investigating dry electrode coating processes, where precise powder characteristics directly impact final electrode performance.
Voltage
220V/50HZ
Dimensions
W550 * D650 H1300mm
Power
About 6kw
Weight
110kg
Spray adjustment range
0-0.5MPa (recommended 0.1-0.2MPa)
minimum feed capacity
50ml
Electric box heat dissipation
Brushless DC motor fan heat dissipation
average drying time
1.0~1.5S
Spray air compressor
Oil-free air compressor
Temperature sensor
PT-100 thermocouple
Temperature adjustment accuracy
Inlet temperature 1 ℃
liquid feeding pump
rotor peristaltic pump maximum 2000 ml/H (feed pipe: imported silicone peristaltic pipe)
temperature setting range
30-300 ℃, outlet temperature 30-140 ℃,PID automatically controls outlet temperature; (It is difficult to recover light materials. Please inform our company in advance to design a machine with 200 air inlet for you, and the recovery rate will be higher)
Fan
Single-phase low-noise fan, fan flow rate: 9.5m ³/min, air pressure: 1.1KPa, air inlet treatment fiber cotton filtration
Equipment control mode
Program is programmed into touch screen control, PLC system programming
Spray air connection diameter
6mm outer diameter air pipe
Water evaporation capacity
1500-2000 mL/h
nozzle diameter
Optional 1.0/1.5/2.0/2.2mm standard configuration 1.0mm
Spray pressure air inlet
106L/min; Exhaust volume: 36L/min; Input power 580W
atomization mode
2 fluid atomization nozzle 316 material

& nbsp; & nbsp; & nbsp; Spray drying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder


1. the whole machine is made of high-quality stainless steel;
2. the atomization chamber


Need R&D Support?

Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.

Experimental Materials

Category

Cathode, anode, electrolyte, separator, and other materials for battery research.

Shop cathode, anode & electrolyte materials →

Lab Equipment

Category

Battery lab equipment for pilot lines, fixtures, and testing workflows.

Browse battery lab equipment →

Electrodes & Cells

Category

Custom electrodes, dry cells, and battery cell components for R&D validation.

View custom battery electrodes & cells →

Sodium Electrolyte

Category

Sodium-ion electrolyte options for sodium battery research and validation.

Shop sodium battery electrolytes →

R&D Services

Service

Full-chain battery R&D services from material evaluation to cell fabrication and failure analysis.

Explore Canrud R&D services →

Material Evaluation

Service

Characterization, electrochemical testing, and compatibility evaluation for battery materials.

Evaluate your battery materials →

Electrode Fabrication

Service

Custom electrode sheets and rolls based on your target chemistry and process needs.

Request electrode fabrication →

Cell Fabrication

Service

Dry cells, assembled cells, and custom-format cell builds for R&D validation.

Build custom research cells →

Contact

Page

Ask Canrud to match products, materials, and services for your project.

Get product and R&D support →