Double Planetary Vacuum Mixer (300 L)

Model：

CAN-MIX13-0300LV

Applied range：

Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.

Date issued：

2024-12-27 03:40:51

Equipment Size：

L3040mm* W1610mm * H3110mm

Weight：

8500kg

Details

نظرة عامة

مواصفات

تفاصيل

This product is a 300L double planetary vacuum mixer, developed for efficient and homogeneous mixing of high-viscosity materials in advanced battery manufacturing. Designed for both cylindrical and pouch cell production lines, it employs a dual planetary mechanism combined with vacuum operation to eliminate air bubbles and ensure thorough dispersion of active materials and binders. The 300-liter capacity supports medium-to-large scale batch processing, making it suitable for electrode slurry preparation and other precision compounding tasks. Built with robust construction and controlled mixing parameters, it helps maintain material consistency and process reliability. The equipment integrates seamlessly into automated production workflows, contributing to improved electrode quality and battery performance. This mixer is a practical choice for R&D and production environments requiring repeatable, high-shear mixing under controlled atmospheric conditions.

volume (l)	design volume 369L, operating volume 300L
equipment weight	about 8.5 tons
operating environment	room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH
site bearing	Ground load-bearing requirement ≥ 2000kg/m²
power	about 62kW
equipment size	L3040mm * W1610mm * H3110mm

window port	DN100
Vacuum Pressure Holding	Static 12H Vacuum Leakage Rate ≤ 20%
Dispersion Speed	0~2200 r/min, Frequency Conversion Speed Regulation
equipment capacity	equipment failure rate ≤ 2%
Not Applicable	Acetone Solvent
stirring mode	double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power	30kW
cold and hot water	temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out
safety protection function	1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port	DN40 ball valve controls discharge port
feed port 4	DN32 clamp type
compressed air	interface Φ 8 air pipe (0.4~0.6MPa)
feed port 2	DN150 clamp type
spotlight window	DN100
lower barrel cooling circulating water inlet and outlet	DN25
nitrogen	Interface DN20(0.2~0.5MPa, nitrogen flow> 0.3~3 m/min)
Applicable Slurry	Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%
Feeding Port 1	DN150 Clamp Type
Stirring paddle speed	0~44 r/min, frequency conversion speed regulation
Lower Barrel Cooling Circulating Water Pressure Relief Port	DN10
equipment bearing temperature	7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Applicable Powder	PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Vacuum	interface DN20(<-0.096MPa, flow rate> 2~3 m/min)
revolution speed	0~35 r/min
revolution motor power	30kW
feed port 5	DN32 clamp type
Agitator Payload	≧ 3Nm/cm
Applicable Additive	SBR, CNT, etc.
lifting motor power	1.5kW
feed port 3	DN40 Clamp Type