Double Planetary Vacuum Mixer (30 L)

Name: Double Planetary Vacuum Mixer (30 L)
Brand: Canrd
Availability: InStock

Model：

CAN-MIX13-0030LV

Applied range：

Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.

Date issued：

2024-12-27 03:42:02

Equipment Size：

L1660mm* W900mm * H1700mm

Weight：

1300kg

Details

نظرة عامة

مواصفات

تفاصيل

This double planetary vacuum mixer, with a 30-liter working capacity, is developed for preparing high-viscosity electrode slurries used in cylindrical and pouch cell production lines. Its dual-planetary agitation system ensures homogeneous mixing and de-agglomeration of active materials, conductive agents, and binders under vacuum conditions, effectively eliminating air bubbles and improving slurry consistency. The sealed design minimizes solvent evaporation and contamination, supporting repeatable batch processing for research and pilot-scale manufacturing. Common applications include cathode and anode slurry preparation for lithium-ion batteries, where precise control over viscosity and particle dispersion is critical. This model delivers reliable performance for battery material labs and small-volume production environments requiring consistent mixing quality.

Volume (L)	Design volume 40L, use volume 8-30L
operating environment	room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around
Equipment weight	About 1.3 tons
power	about 7.75kW
equipment size	L1660mm * W900mm * H1700mm
Site bearing	Ground bearing requirement ≥ 1200kg/m
power supply	AC:3*380V, 50HZ

window port	DN80
Vacuum Pressure Preservation	Static 12H Vacuum Leakage Rate ≤ 10%
Dispersion Speed	0~5500 r/min, Frequency Conversion Speed Regulation
equipment capacity	equipment failure rate ≤ 2%
Not Applicable	Acetone Solvent
stirring mode	double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power	5.5kW
cold and hot water	temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet
safety protection function	1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port	DN25 ball valve controls discharge port
spotlight window	DN80
lower barrel cooling circulating water inlet and outlet	DN15
Compressed air	Interface Φ8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min)
Applicable Slurry	Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Feeding Port 1	DN80 Clamp Type
Stirring paddle speed	5~55 r/min, frequency conversion speed regulation
equipment bearing temperature	7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Applicable Powder	PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Vacuum	Interface DN155(<-0.096MPa, flow rate> 0.3 m/min)
Feeding port 2	DN15 clamp type
Nitrogen	Interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min)
revolution speed	0~27 r/min
revolution motor power	4kW
Agitator Payload	≧ 3Nm/cm
lifting motor power	0.75kW
Applicable Additives	SBR, CNT, etc.