Double Planetary Vacuum Mixer (200 L)

Model：

CAN-MIX13-0200LV

Applied range：

Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.

Date issued：

2024-12-27 03:41:07

Equipment Size：

L2700mm* W1360mm * H2810mm

Weight：

5200kg

Details

نظرة عامة

مواصفات

تفاصيل

This product is designed for homogeneous mixing of high-viscosity materials in battery electrode slurry preparation. Operating as a double planetary vacuum mixer with a 200L working capacity, it ensures thorough blending under controlled vacuum conditions, which helps minimize air entrapment and improve slurry consistency. Suitable for both cylindrical and pouch cell production lines, this equipment supports the material processing requirements of advanced battery manufacturing. Its robust construction and vacuum system are tailored for research and industrial-scale applications where reproducible mixing quality is essential.

Volume (L)	design volume 265L, operating volume 200L
equipment weight	About 5.2 tons
operating environment	room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around
power	about 45.5kW
equipment size	L270mm * W1360mm * H2810mm
Site bearing	Ground bearing requirement ≥ 1500kg/m

applicable additives	SBR, CNT, etc.
window port	DN100
Feeding port 1	DN125 clamp type
Dispersion Speed	0~2800 r/min, frequency conversion speed regulation
equipment capacity	equipment failure rate ≤ 2%
Feeding port 3	DN50 clamp type
Not Applicable	Acetone Solvent
stirring mode	double spiral stirring paddle and double dispersion shaft (four dispersion discs)
Applicable powder	PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
dispersion motor power	22kW
cold and hot water	temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out
safety protection function	1. acousto-optic warning function: acousto-optic alarm for mixing barrel lifting; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot rise and fall when the mixer is working; 4. Vacuum function: the upper and lower barrels cannot be separated with vacuum; 5. Electrical protection: emergency stop protection for operators, grounding protection for equipment, automatic shutdown alarm for power overload; 6. Phase sequence fault alarm for power supply.
discharge port	DN40 ball valve controls discharge port
spotlight window	DN100
lower barrel cooling circulating water inlet and outlet	DN25
nitrogen	Interface DN20(0.2~0.5MPa, nitrogen flow rate> 0.3~3 m/min)
Compressed air	Interface Φ8 air pipe (0.4~0.6MPa)
Applicable Slurry	Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Stirring paddle speed	0~46 r/min, frequency conversion speed regulation
Lower Barrel Cooling Circulating Water Pressure Relief Port	DN10
equipment bearing temperature	7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
Vacuum pressure holding	Static 12H vacuum leakage rate ≤ 20%
Vacuum	Interface DN20(<-0.096MPa, flow rate> 2~3 m/min)
Feeding port 2	DN100 clamp type
revolution speed	0~39 r/min
revolution motor power	22kW
Feeding port 4	DN40 clamp type
Agitator Payload	≧ 3Nm/cm
lifting motor power	1.5kW