99% Alumina Boats

Name: Diethylene Glycol Dimethyl Ether (DIGLYME) (CAS: 111-96-6)
Brand: Canrd
Price: 60.41 USD
Availability: InStock

$4.62

الاسم

المواصفات

✓ تم الاختيار: Rectangle / 50*10*10mm

الكمية

ضمان الجودة

مباشرة من المصنع

الشحن العالمي

Details

نظرة عامة

مواصفات

تفاصيل

This product is a 99% alumina saggar designed for high-temperature sintering and calcination processes in advanced materials research. Manufactured by Canrd using slip casting or die casting techniques and fired at 1800°C, it offers reliable thermal stability up to 1600°C. The dense corundum structure provides excellent chemical resistance and mechanical strength for repeated use in furnace environments. Typical applications include holding powders, pellets, or small components during solid-state reactions, ceramic synthesis, or battery material preparation. The saggar is available in multiple dimensions with optional covers that serve as dust protection (not airtight). Before first use, a pre-baking step at 105°C for two hours is recommended to remove moisture, and controlled heating/cooling rates are advised to prevent thermal shock. Custom sizing is supported, though customized items are non-returnable unless defective.

Customization supported

Customized products are non-refundable and non-exchangeable unless there is a quality issue.

1. The corundum boat is made using a slip casting/die casting process and fired at 1800℃. Slight dimensional errors may occur.

2. High temperature resistant up to 1600℃.

3. Before first use, please bake in an oven at approximately 105℃ for 120 minutes to remove moisture.

4. The heating or cooling rate should not be too rapid. Below 1200℃, the temperature change should be <5℃/minute; above 1200℃, the temperature change should be <4℃/minute. For cooling, it is recommended to use electrical temperature control.

5. Do not use a spray gun, acetylene torch, or alcohol lamp for direct heating to avoid uneven heating and cracking.

6. The corundum boat with a lid serves as a dustproof cover; the lid is not airtight. Please note.