Sodium-ion Battery Cathode Electrode Sheet (NFM Sodium Nickel Iron Manganese Oxide NT02)

Name: Sodium-ion Battery Cathode Electrode Sheet (NFM Sodium Nickel Iron Manganese Oxide NT02)
Brand: Canrd
Price: 90.61 USD
Availability: InStock

$90.61

Model：

CU-EL-PS-1003

item_No

Specifications

Price

CU-EL-PS-100301

Single-sided (5 pieces/pack) (Calendered)

$90.61

Details

This product is a sodium-ion battery cathode electrode sheet based on sodium nickel iron manganese oxide (NTO2XX), designed for researchers developing layered oxide cathodes for sodium-ion cells. The electrode features a high active material ratio of 95.5% on a 12 µm aluminum foil current collector, with a coating areal density of 12.27 mg/cm² and a theoretical surface capacity of 1.49 mAh/cm². It delivers a specific capacity of 120 mAh/g when tested at 0.1C between 2.00 and 4.00 V at 25 °C. Offered in both rolled and unrolled versions, the unrolled sheet requires user-controlled calendering to achieve a compacted density between 2.00 and 2.50 g/cc before use. For optimal performance, the recommended electrolyte is KLD‑NC06, and the electrode can be paired with the YT02XX anode (N/P ratio 1.16) for full-cell assembly. Pre-baking at 85–105 °C for 4 hours is advised prior to glovebox entry, and active material mass should be calculated based on actual disc weight.

Canrd	10*10cm		5 sheets/pack			Coating
NO.	Electrode Name	Model	Main Material	Active Material Capacity (mAh/g)	Loading	Areal Density (mg/cm²)	Areal Capacity (mAh/cm²)
1	NCA Electrode	SY51	NCA-S (Nickel Cobalt Aluminum Oxide)	195	94.50%	17.66	3.25
2	Ni90 Electrode	SY41	Ni90 Single Crystal NCM	195	94.50%	9.50	1.75
3	NCM811 Electrode	SY33	NCM811 Single Crystal	188	94.50%	9.20	1.63
4	NCM811 Electrode	SY34	—	188	94.50%	21.50	3.82
5	NCM622 Electrode	SY25	NCM622 Single Crystal-B	168	96.70%	10.00	1.62
6	NCM622 Electrode	SY24	—	168	96.70%	21.60	3.51
7	NCM523 Electrode	SY15	NCM523	165	94.00%	19.70	3.06
8	NCM523 Electrode	SY13	NCM523	165	94.00%	10.50	1.63
9	LCO Electrode	LC02	High Voltage Lithium Cobalt Oxide-Z-4.45V	178	96.40%	10.00	1.72
10	LRM Electrode	FL01	Lithium-rich Manganese-based-E	280	95.00%	5.96	1.59
11	Graphite Electrode	SM02	Natural Graphite (Standard)-A	340	95.70%	5.80	1.89
12	Fast Charging Graphite Electrode	SM04	Fast Charging Graphite-B	350	96.70%	5.60	1.90
13	Silicon Carbon Electrode	SC02	Silicon Carbon Anode 1800 (Porous Carbon Deposited Silicon)	420	95.00%	4.80	1.92
14	NFM Electrode	NT02	Sodium Nickel Iron Manganese Oxide	127	95.50%	12.27	1.49
15	NFM Electrode	NT03	—	127	95.50%	8.00	0.97
16	Hard Carbon Electrode	YT02	Imported Hard Carbon (5 μm)	300	95.50%	6.00	1.72
17	LFP Electrode	LF07	Lithium Iron Phosphate (High Compaction Density)	150	91.50%	12.30	1.69
18	LNMO Electrode	NM01	High Voltage Lithium Nickel Manganese Oxide-B	130	96.00%	7.50	2.00
19	NFPP Electrode	NF01	Sodium Iron Phosphate Pyrophosphate	100	93.50%	15.30	1.43
20	Vanadium Pentoxide Electrode	VO02	Vanadium Pentoxide	300	80.00%	5.00	1.20
21	Manganese Dioxide Electrode	MO01	Manganese-based or Vanadium-based Material	100	80.00%	5.00	/
22	Zinc Negative Electrode	ZA01	Pure Zinc Powder / Alloy Zinc Powder	/	70.0%–96.0%	5.0–15.0	/

MOQ for Custom Small Electrode Sheets: 10*10cm/pcs，5cs/pack，1pack

To place an order or request a quotation, please Contact Us.

Because it is a single-sided electrode, there will be a curl after rolling, so the shipped roller-pressed electrode has controlled and compacted to ensure that the electrode is not rolled;

Rolling can improve the compacting density of the electrode, improve the electronic conductivity of the electrode, and improve the bonding.

1. The electrode should be rolled before use, and the customer needs to arrange the rolling pressure by himself to purchase the electrode that has not been rolled;

2. The surface density shall be determined according to the actual weighing results;

3. Before putting it in the glove box, the punched electrode needs to be vacuum baked at a temperature of 105 °C for 4 hours;

4. This electrode can be matched with our YT0101 anode electrode; 5. The density of the coating surface does not include the current collector;

6. Theoretical surface capacity mAh/cm2 = coating surface density mg/cm2 * proportion of active substance * gram capacity mAh/g÷1000;

7. The amount of theoretical active substance (mg) = coating surface density mg/cm2 * proportion of active substance * small disc area cm2;

8. The actual weighing calculates the amount of active substance (mg) = (weight of small disc mg - current collector surface density mg/cm2 * small disc area cm2) * proportion of active substance, and calculates the gram capacity according to the amount of active substance actually weighed, due to the tolerance of the density of the coating surface, the actual weighing shall prevail.

This product must be tested in accordance with the test methods and electrolytes recommended by Coulter to achieve the corresponding performance.Since the test method and electrolyte have a great influence on the performance of the battery, any change in the test method or electrolyte may reduce the performance of the pole piece; be sure to check this information before purchasing.

Surface density of the current collector (mg/cm²)	3.3
Current collector thickness (µm)	12 (aluminum foil)
Electrode size	10*10cm
active ingredient ratio	95.50%
Electrode types compatible with full-cell batteries (N/P ratio)	YT02XX(1.16)
Compacted density (g/cc)	2.00-2.50 (Compaction value not provided for unrolled electrode sheets; calculate it yourself)
Active materials	Sodium nickel iron manganate
Shelf life	Store for six months (vacuum sealed); use within one month of opening.
Recommended electrolyte	KLD-NC06
Extreme film name	Sodium-nickel iron manganese oxide electrode
Electrode Number	NT02XX
Active material specific capacity (mAh/g)	120 (2.00-4.00V)
Test Conditions Description	At room temperature (25℃), let stand for 4 hours, charge at a 0.1C rate (constant current) to 4.00V, charge at 4.00V constant voltage to 0.02C, let stand for 3 minutes, discharge at a 0.1C rate (constant current) to 2.00V, and let stand for 3 minutes.
Test conditions	Normal temperature 25℃, 0.1/0.1C, 2.00-4.00V
Surface capacity (mAh/cm²)	1.49
Coating areal density (mg/cm²)	12.27 (tolerance is ±2.0%)
Usage Recommendations	1. If the electrode sheet is not rolled, it generally needs to be rolled before punching and baking (the compaction density can be referenced from the minimum value in the "Compaction Density" column of this table); 2. Baking conditions: 85-105℃ for 4 hours (if vacuum baking, it needs to be ventilated twice); 3. The mass of active material needs to be determined according to the actual weight of each small disc.

Sodium-ion Battery Cathode Electrode Sheet (NFM Sodium Nickel Iron Manganese Oxide NT02)

Details

Need R&D Support?

Experimental Materials

Lab Equipment

Electrodes & Cells

Sodium Electrolyte

R&D Services

Material Evaluation

Electrode Fabrication

Cell Fabrication

Contact