Double planetary vacuum mixer (300L)
Model：
CAN-MIX13-0300LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:40:51
Equipment Size：
L3040mm* W1610mm * H3110mm
Weight：
8500kg
Details
This product is a 300L double planetary vacuum mixer, developed for efficient and homogeneous mixing of high-viscosity materials in advanced battery manufacturing. Designed for both cylindrical and pouch cell production lines, it employs a dual planetary mechanism combined with vacuum operation to eliminate air bubbles and ensure thorough dispersion of active materials and binders. The 300-liter capacity supports medium-to-large scale batch processing, making it suitable for electrode slurry preparation and other precision compounding tasks. Built with robust construction and controlled mixing parameters, it helps maintain material consistency and process reliability. The equipment integrates seamlessly into automated production workflows, contributing to improved electrode quality and battery performance. This mixer is a practical choice for R&D and production environments requiring repeatable, high-shear mixing under controlled atmospheric conditions.
volume (l) | design volume 369L, operating volume 300L |
equipment weight | about 8.5 tons |
operating environment | room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH |
site bearing | Ground load-bearing requirement ≥ 2000kg/m² |
power | about 62kW |
equipment size | L3040mm * W1610mm * H3110mm |
window port | DN100 |
Vacuum Pressure Holding | Static 12H Vacuum Leakage Rate ≤ 20% |
Dispersion Speed | 0~2200 r/min, Frequency Conversion Speed Regulation |
equipment capacity | equipment failure rate ≤ 2% |
Not Applicable | Acetone Solvent |
stirring mode | double spiral stirring paddle and double dispersion shaft (four dispersion discs) |
dispersion motor power | 30kW |
cold and hot water | temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out |
safety protection function | 1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm. |
discharge port | DN40 ball valve controls discharge port |
feed port 4 | DN32 clamp type |
compressed air | interface Φ 8 air pipe (0.4~0.6MPa) |
feed port 2 | DN150 clamp type |
spotlight window | DN100 |
lower barrel cooling circulating water inlet and outlet | DN25 |
nitrogen | Interface DN20(0.2~0.5MPa, nitrogen flow> 0.3~3 m/min) |
Applicable Slurry | Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70% |
Feeding Port 1 | DN150 Clamp Type |
Stirring paddle speed | 0~44 r/min, frequency conversion speed regulation |
Lower Barrel Cooling Circulating Water Pressure Relief Port | DN10 |
equipment bearing temperature | 7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water |
Applicable Powder | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc. |
Vacuum | interface DN20(<-0.096MPa, flow rate> 2~3 m/min) |
revolution speed | 0~35 r/min |
revolution motor power | 30kW |
feed port 5 | DN32 clamp type |
Agitator Payload | ≧ 3Nm/cm |
Applicable Additive | SBR, CNT, etc. |
lifting motor power | 1.5kW |
feed port 3 | DN40 Clamp Type |
& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system
1. adopt the intelligent control of the control panel or the central control system
Need R&D Support?
Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrud R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrud to match products, materials, and services for your project.
Get product and R&D support →