Double planetary vacuum mixer (200L)
Model：
CAN-MIX13-0200LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:41:07
Equipment Size：
L2700mm* W1360mm * H2810mm
Weight：
5200kg
Details
This product is designed for homogeneous mixing of high-viscosity materials in battery electrode slurry preparation. Operating as a double planetary vacuum mixer with a 200L working capacity, it ensures thorough blending under controlled vacuum conditions, which helps minimize air entrapment and improve slurry consistency. Suitable for both cylindrical and pouch cell production lines, this equipment supports the material processing requirements of advanced battery manufacturing. Its robust construction and vacuum system are tailored for research and industrial-scale applications where reproducible mixing quality is essential.
volume (L) | design volume 265L, operating volume 200L |
equipment weight | About 5.2 tons |
operating environment | room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around |
power | about 45.5kW |
equipment size | L270mm * W1360mm * H2810mm |
Site bearing | Ground bearing requirement ≥ 1500kg/m |
applicable additives | SBR, CNT, etc. |
window port | DN100 |
Feeding port 1 | DN125 clamp type |
Dispersion Speed | 0~2800 r/min, frequency conversion speed regulation |
equipment capacity | equipment failure rate ≤ 2% |
Feeding port 3 | DN50 clamp type |
Not Applicable | Acetone Solvent |
stirring mode | double spiral stirring paddle and double dispersion shaft (four dispersion discs) |
Applicable powder | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc. |
dispersion motor power | 22kW |
cold and hot water | temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out |
safety protection function | 1. acousto-optic warning function: acousto-optic alarm for mixing barrel lifting; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot rise and fall when the mixer is working; 4. Vacuum function: the upper and lower barrels cannot be separated with vacuum; 5. Electrical protection: emergency stop protection for operators, grounding protection for equipment, automatic shutdown alarm for power overload; 6. Phase sequence fault alarm for power supply. |
discharge port | DN40 ball valve controls discharge port |
spotlight window | DN100 |
lower barrel cooling circulating water inlet and outlet | DN25 |
nitrogen | Interface DN20(0.2~0.5MPa, nitrogen flow rate> 0.3~3 m/min) |
Compressed air | Interface Φ8 air pipe (0.4~0.6MPa) |
Applicable Slurry | Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100 |
Stirring paddle speed | 0~46 r/min, frequency conversion speed regulation |
Lower Barrel Cooling Circulating Water Pressure Relief Port | DN10 |
equipment bearing temperature | 7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water |
Vacuum pressure holding | Static 12H vacuum leakage rate ≤ 20% |
Vacuum | Interface DN20(<-0.096MPa, flow rate> 2~3 m/min) |
Feeding port 2 | DN100 clamp type |
revolution speed | 0~39 r/min |
revolution motor power | 22kW |
Feeding port 4 | DN40 clamp type |
Agitator Payload | ≧ 3Nm/cm |
lifting motor power | 1.5kW |
& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system
1. adopt the intelligent control of the control panel or the central control system
Need R&D Support?
Browse key product categories and connect battery materials with Canrd's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrd R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrd to match products, materials, and services for your project.
Get product and R&D support →