HTF Flanged Reactor (316L)

Name: Lithium Tantalum Oxychloride (LTOC) Solid Electrolyte, 1-10 μm
Brand: Canrd
Price: 317.14 USD
Availability: InStock

$184.25

아이템 번호:MA-CM-ME-000301

사양

✓ 선택됨: HTF10SS1/10ml/49bar/500℃/316L

수량

품질 보증

공장 직판

전 세계 배송

Details

개요

사양

상세 정보

This HTF flange reactor, constructed from 316L stainless steel, is developed for high-temperature hydrothermal synthesis and material processing under elevated pressure. It employs a metal hard seal design with symmetrically tightened bolts to create a closed, leak-resistant environment suitable for reactions up to 500 °C and 49 bar. The reactor body is built without an inner liner, relying on the corrosion resistance and mechanical integrity of 316L for direct contact with reactants. Available in capacities from 10 ml to 500 ml, it is commonly applied in advanced materials research, including the synthesis of zeolites, nanoparticles, and crystalline compounds. Users should consider solvent vapor pressure and avoid use with low-boiling-point or highly hazardous substances. This unit is suited for laboratory settings requiring reproducible, high-temperature reaction conditions with reliable sealing performance.

The HTF flange type hydrothermal reactor adopts a metal hard seal and forms a simple closed container by symmetrically tightening the fastening bolts, thereby providing a high-temperature resistant hydrothermal reaction environment.

Precautions for using hydrothermal reaction kettle:

1. Before using the hydrothermal reactor, please carefully check the saturated vapor pressure of the solvent used at the reaction temperature to confirm that it will not exceed the maximum allowable operating pressure of the hydrothermal reactor before use.

2. When using the HTG/HTS series hydrothermal reaction kettle, due to the PTFE material used for the inner liner of the kettle, there is a certain degree of compressibility under high temperature and high pressure environment. It is not advisable to overtighten the kettle cover and top screw during initial use to avoid severe deformation of the inner liner caused by thermal expansion and compression under high temperature and high pressure.

3. When the operating temperature of the hydrothermal reaction kettle exceeds 150 ℃, it is recommended to apply a layer of high-temperature lithium based grease on the threads before tightening the kettle cover to prevent the stainless steel threads from biting under high temperature (models with silver plating process on the kettle cover do not need to apply grease).

4. It is prohibited to use hydrothermal synthesis reactors in the following situations:

a. The boiling point of solvents is below 60 ℃ (such as acetone, dichloromethane, etc.);

b. A large amount of gas will be generated during the reaction process;

c. The material has flammable and explosive characteristics or a toxicity level of extreme and high hazard (see: "HG 20660-2000 Classification of Toxic Hazards and Explosion Hazards of Chemical Media in Pressure Vessels").

The flange type hydrothermal reactor is made of all stainless steel material, and the sealing form mainly adopts metal hard seal. The material of the reactor body is 316L, and the long-term use temperature can reach 500 degrees Celsius, with a high allowable use pressure of 49 bar.

Design capacity: 10/25/50/100mL

Maximum allowable working pressure: 49 bar

Maximum operating temperature: 500 ℃

Sealing form: metal hard seal

Inner liner material: None