Hot-Press Battery Formation Machine (Automatic, 8CH)

Model：

CAN-FOR0A-5V6AAU

Applied range：

Softpack battery hot press forming machine is the 1 hot press forming equipment applied to soft pack lithium ion battery. The equipment through the PLC control servo motor to adjust the pressure, the maximum pressure can reach 2.0T, the maximum heating temperature 90 ℃. The maximum output voltage of a single channel is 5V, the maximum current is 6A, and the configuration is 8 channels, which can realize the hot press formation test of soft-pack lithium ion batteries of different sizes.

Date issued：

2024-12-02 01:07:16

Equipment Size：

550mm* 600mm * 950mm (not including the height of the three-color lamp)

Weight：

200kg

Details

개요

사양

상세 정보

This hot press forming machine is designed for automated battery formation and capacity grading processes, specifically tailored for single-layer stacked battery lines. The model CAN-FOR0A-5V6AAU from Canrd integrates an 8-channel configuration to enable simultaneous processing, improving throughput and consistency in production. It supports precise temperature and pressure control essential for forming lithium-ion or similar battery cells during initial charge-discharge cycles. The system’s automatic operation reduces manual intervention, enhancing repeatability and safety in research or pilot-scale manufacturing environments. Commonly applied in battery R&D facilities and small-to-medium production lines, this equipment helps ensure uniform electrode activation and electrolyte wetting. Its compact design and modular structure allow for straightforward integration into existing workflows, making it a practical choice for researchers and engineers working on advanced energy storage devices.

temperature control range	normal temperature ~ 90 ℃
rated power	1.6kW
equipment weight	about 200kg
rated voltage	AC220V/50Hz
output current	30 ~ 6000mA
output voltage	charging: 0V ~ 5V; Discharge: 2V ~ 5V
Equipment size	550mm * 600mm * 950mm (excluding height of three-color lamp)

voltage accuracy	± 0.05 FS
current stability	± 0.05 FS
Maximum Heating Power	600W (200W per heating plate, 3 layers in total)
single channel output power	0W ~ 30W
charge	charge mode: constant current charge, constant current and constant voltage charge, cut-off condition: voltage, current, time
Maximum Input Power	1.6kW
Servo Motor Power	750W
voltage resolution	1mV
output current	30 ~ 6000mA
current resolution	1mA
charge and discharge conversion time (-90% ~ 90%)	≤ 40ms
protection	Channel protection: over and under voltage, over current/short circuit, battery reverse connection, over temperature protection, etc., step protection: voltage/current upper and lower limits, charge and discharge capacity upper limit protection, etc., emergency stop protection: press the emergency stop button to stop the equipment
current accuracy	± 0.05 FS
overall efficiency	≥ 70%
Cycle	Cycle times: 1~65000, cycle steps: 1~256, cycle nesting: 1~9
power supply model	BTS5V6A-8CH
number of equipment channels	8CH
Heat Preservation Power	300W
Equipment Pressure	150kg ~ 2000kg / <1t accuracy 10kg / >1t accuracy 1% kg
charge and discharge rise time (10% ~ 90%)	≤ 20ms
temperature control system	normal temperature ~ 90 ℃, normal temperature ~ 60 ℃ heating time ≤ 25min temperature difference 2 ℃
output voltage	charging: 0V ~ 5V; Discharge: 2V ~ 5V
Conversion Power	240W (30W per channel, 8 channels in total)
Single point control	Each channel operates independently without interfering with each other

& nbsp; & nbsp; Soft pack battery hot press forming machine is the 1 hot press forming equipment applied to soft pack lithium ion battery. The equipment through the PLC control servo motor to adjust the pressure

1. The safety protection performance of this machine is perfect. The pressurization can only be started after the insulation door is closed to ensure the safety of the operator;

2. Adjustable temperature and pressure, can adapt to a variety of working conditions;

3. It can meet the needs of a variety of battery specifications, and can also be customized according to customer requirements;

4. the temperature and pressure control accuracy is high, and after the temperature and pressure conditions are met, the formation process is automatically started without manual start-up. after the formation is completed, there are manual and automatic fixture opening modes for customers to choose and use.