High Hydrophilicity Zinc Foil

High Hydrophilicity Zinc Foil

$30.21
아이템 번호:MA-EN-CU-001901
✓ 선택됨: 0.1*95*95mm (single-sided laser processing)
품질 보증
공장 직판
전 세계 배송

Details

The thickness of zinc foil is 0.1mm (purity: 99.99%), the upper and lower sides are glass, the zinc foil is sandwiched in the middle, and the front side of the logo is a laser treatment surface. When used, the treatment surface faces the counter electrode.

According to the symmetrical battery charge and discharge cycle test, the cycle life of the negative electrode material is significantly improved by nearly three times compared with the original zinc foil.

image.png

image.png

  • High hydrophilic zinc foil is a zinc negative electrode substrate specially developed for the negative electrode modification experiment of zinc ion battery. After surface laser treatment, it shows excellent performance optimization effect.
  • This treatment process effectively eliminates the inherent cracks and gaps caused by the rolling and stretching processes of zinc foil surface, which often have adverse effects during battery assembly.
  • At the same time, surface laser treatment generates a large number of uniformly distributed active sites on the surface of zinc foil, which has a significant promoting effect on improving the assembly experimental performance of zinc ion batteries.
  • Under the strict control of maintaining the same assembly conditions and testing conditions, the cycle life of the zinc-zinc symmetrical battery using this high-performance zinc foil has been greatly increased from the original 155 cycles to 487 cycles, achieving a cycle life growth of more than three times, fully demonstrating the huge potential of the high-performance zinc foil in improving battery performance.

 

According to the symmetrical battery charge and discharge cycle test, the cycle life of the negative electrode material is significantly improved by nearly three times compared with the original zinc foil.

High hydrophilic zinc foil has been laser surface treatment and is packaged using glass interlayer, focusing on high-end products for experiments.Please wear gloves when disassembling, the surface of the product has more active sites. If you hold it directly by hand, it will easily get infected with fingerprints, and the fingerprints are difficult to remove, which may affect performance.Returns and exchanges are not accepted after unpacking.

Packaging, Transportation and Storage

Glass‑sandwiched, vacuum‑sealed packaging.
The product can be used directly without cleaning (nitrogen‑purged before delivery). Any unused material after opening shall be hermetically stored in a dry environment, e.g. inside a desiccator.

Others

Adopting advanced laser treatment technology, the inherent micro‑defects such as cracks and crevices generated during rolling and stretching production are fully eliminated from the zinc‑foil surface.
 
These micro‑structural defects are highly detrimental to battery assembly. After treatment, the zinc‑foil surface achieves superior smoothness, with surface defects and impurities greatly reduced. The optimized zinc foil effectively improves the charge‑discharge efficiency and cycle life of batteries.

 

 

none
none

R&D 지원이 필요하신가요?

주요 제품 카테고리를 확인하고 배터리 소재를 Canrd R&D 서비스와 연결하세요.

실험 소재

카테고리

배터리 연구용 양극, 음극, 전해액, 분리막 및 기타 소재.

양극, 음극 및 전해액 소재 보기 →

실험 장비

카테고리

파일럿 라인, 지그 및 테스트 워크플로용 배터리 실험 장비.

배터리 실험 장비 보기 →

전극 및 셀

카테고리

R&D 검증을 위한 맞춤 전극, 드라이 셀 및 배터리 셀 부품.

맞춤 배터리 전극 및 셀 보기 →

나트륨 전해액

카테고리

나트륨 배터리 연구 및 검증을 위한 나트륨 이온 전해액 옵션.

나트륨 배터리 전해액 보기 →

R&D 서비스

서비스

소재 평가부터 셀 제작 및 고장 분석까지 전주기 배터리 R&D 서비스.

Canrd R&D 서비스 살펴보기 →

소재 평가

서비스

배터리 소재의 특성 분석, 전기화학 테스트 및 호환성 평가.

배터리 소재 평가하기 →

전극 제작

서비스

목표 화학계와 공정 요구에 맞춘 맞춤 전극 시트 및 롤.

전극 제작 요청하기 →

셀 제작

서비스

R&D 검증을 위한 드라이 셀, 조립 셀 및 맞춤 셀 형식.

맞춤 연구 셀 제작하기 →

문의

페이지

Canrd가 프로젝트에 맞는 제품, 소재 및 서비스를 연결해 드립니다.

제품 및 R&D 지원 받기 →