Double planetary vacuum mixer (30L)
Model：
CAN-MIX13-0030LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:42:02
Equipment Size：
L1660mm* W900mm * H1700mm
Weight：
1300kg
Details
This double planetary vacuum mixer, with a 30-liter working capacity, is developed for preparing high-viscosity electrode slurries used in cylindrical and pouch cell production lines. Its dual-planetary agitation system ensures homogeneous mixing and de-agglomeration of active materials, conductive agents, and binders under vacuum conditions, effectively eliminating air bubbles and improving slurry consistency. The sealed design minimizes solvent evaporation and contamination, supporting repeatable batch processing for research and pilot-scale manufacturing. Common applications include cathode and anode slurry preparation for lithium-ion batteries, where precise control over viscosity and particle dispersion is critical. This model delivers reliable performance for battery material labs and small-volume production environments requiring consistent mixing quality.
volume (L) | Design volume 40L, use volume 8-30L |
operating environment | room temperature: 25 ℃ 5 ℃, humidity: ≤ 30% RH, no flammable and explosive gas, liquid or solid around |
Equipment weight | About 1.3 tons |
power | about 7.75kW |
equipment size | L1660mm * W900mm * H1700mm |
Site bearing | Ground bearing requirement ≥ 1200kg/m |
power supply | AC:3*380V, 50HZ |
window port | DN80 |
Vacuum Pressure Preservation | Static 12H Vacuum Leakage Rate ≤ 10% |
Dispersion Speed | 0~5500 r/min, Frequency Conversion Speed Regulation |
equipment capacity | equipment failure rate ≤ 2% |
Not Applicable | Acetone Solvent |
stirring mode | double spiral stirring paddle and double dispersion shaft (four dispersion discs) |
dispersion motor power | 5.5kW |
cold and hot water | temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet |
safety protection function | 1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm. |
discharge port | DN25 ball valve controls discharge port |
spotlight window | DN80 |
lower barrel cooling circulating water inlet and outlet | DN15 |
Compressed air | Interface Φ8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min) |
Applicable Slurry | Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100 |
Feeding Port 1 | DN80 Clamp Type |
Stirring paddle speed | 5~55 r/min, frequency conversion speed regulation |
equipment bearing temperature | 7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water |
Applicable Powder | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc. |
Vacuum | Interface DN155(<-0.096MPa, flow rate> 0.3 m/min) |
Feeding port 2 | DN15 clamp type |
Nitrogen | Interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min) |
revolution speed | 0~27 r/min |
revolution motor power | 4kW |
Agitator Payload | ≧ 3Nm/cm |
lifting motor power | 0.75kW |
Applicable Additives | SBR, CNT, etc. |
& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system
1. adopt the intelligent control of the control panel or the central control system
Need R&D Support?
Browse key product categories and connect battery materials with Canrd's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrd R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrd to match products, materials, and services for your project.
Get product and R&D support →