Double Planetary Vacuum Mixer (10 L)

Model：

CAN-MIX13-0010LV

Applied range：

Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.

Date issued：

2024-12-27 03:42:34

Equipment Size：

L1380mm* W620mm * H1420mm

Weight：

670kg

Details

개요

사양

상세 정보

This 10-liter double planetary vacuum mixer is developed for high-precision mixing processes in advanced battery manufacturing, particularly suited for both cylindrical and pouch cell production lines. Designed with a dual-planetary mixing mechanism, it ensures uniform dispersion of viscous slurries, including cathode and anode materials, under controlled vacuum conditions to eliminate air bubbles and improve electrode coating quality. The model CAN-MIX13-0010LV from Canrd features robust construction suitable for laboratory-scale to pilot-scale operations, enabling efficient homogenization of electrode pastes with consistent rheological properties. Its vacuum capability also supports degassing and solvent recovery, critical for achieving high-energy-density battery materials. Common applications include preparing lithium-ion battery electrode slurries, conductive additives, and other high-viscosity composite mixtures where particle distribution and process repeatability are essential. This mixer integrates seamlessly into automated battery assembly workflows, offering reliable performance for research and development or small-batch production.

Volume (L)	Design Volume 14L Operating Volume 10L
Equipment Size	L1380mm * W620mm * H1420mm
Site Bearing	Ground load-bearing requirement ≥ 1000kg/m²
Operating Environment	regular Environment
Power	About 6.6kW
Power Supply	AC:3*380V, 50HZ
Equipment Weight	About 0.67 Tons

window port	DN50
Dispersion Speed	200~6000 r/min, Frequency Conversion Speed Regulation
equipment capacity	equipment failure rate ≤ 2%
Not Applicable	Acetone Solvent
stirring mode	double spiral stirring paddle and double dispersion shaft (four dispersion discs)
dispersion motor power	3kW
cold and hot water	temperature: 8~20 ℃,0.1~0.4MPa, water inlet and outlet pressure difference ≧ 0.1MPa, lower in and upper out
safety protection function	1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm.
discharge port	DN25 ball valve control discharge port
compressed air	interface Φ8 air pipe (0.4~0.6MPa, flow> 0.3 m/min)
spotlight window	DN50
lower barrel cooling circulating water inlet and outlet	DN15
vacuum	interface DN10(<-0.096MPa, flow> 0.3 m/min)
nitrogen	interface DN10(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min)
applicable powder	PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc.
Applicable Slurry	Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100
Stirring paddle speed	5~55 r/min, frequency conversion speed regulation
equipment bearing temperature	7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water
revolution speed	3~31 r/min
revolution motor power	3kW
vacuum pressure maintaining	static 12H vacuum leakage rate ≤ 10%
Agitator Payload	≧ 3Nm/cm
lifting motor power	0.55kW
Applicable Additives	SBR, CNT, etc.
feeding port 1	DN15 clamp type