spray dryer

Name: spray dryer
Brand: Canrud
Availability: InStock

Model：

CAN-SPD74-1500AS

Applied range：

Spraydrying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder, granular or block solid products from solution, emulsion, suspension and plastic paste liquid raw materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet precise criteria. Spray drying is an ideal process.

Date issued：

2024-12-23 21:27:16

Equipment Size：

W550mm* D650mm * H1300mm

Weight：

110kg

Details

Overview

Specifications

Details

This spray dryer, model CAN-SPD74-1500AS from Canrd, is developed for integration into dry electrode preparation lines, serving as a key piece of spray equipment in advanced battery material processing. It is designed to convert liquid precursors or slurries into fine, uniform dry powders through controlled atomization and hot gas contact, preserving material morphology and consistency. The unit supports research and production scale operations where moisture-sensitive electrode materials require gentle yet efficient drying. Its technical configuration is optimized for compatibility with solvent-based or aqueous formulations common in lithium-ion battery cathode and anode fabrication. While specific parameters are not detailed here, the model designation suggests a throughput capacity suited for pilot or small-scale manufacturing environments. This equipment is particularly relevant for laboratories and pilot lines investigating dry electrode coating processes, where precise powder characteristics directly impact final electrode performance.

Voltage	220V/50HZ
Dimensions	W550 * D650 H1300mm
Power	About 6kw
Weight	110kg

Spray adjustment range	0-0.5MPa (recommended 0.1-0.2MPa)
minimum feed capacity	50ml
Electric box heat dissipation	Brushless DC motor fan heat dissipation
average drying time	1.0~1.5S
Spray air compressor	Oil-free air compressor
Temperature sensor	PT-100 thermocouple
Temperature adjustment accuracy	Inlet temperature 1 ℃
liquid feeding pump	rotor peristaltic pump maximum 2000 ml/H (feed pipe: imported silicone peristaltic pipe)
temperature setting range	30-300 ℃, outlet temperature 30-140 ℃,PID automatically controls outlet temperature; (It is difficult to recover light materials. Please inform our company in advance to design a machine with 200 air inlet for you, and the recovery rate will be higher)
Fan	Single-phase low-noise fan, fan flow rate: 9.5m ³/min, air pressure: 1.1KPa, air inlet treatment fiber cotton filtration
Equipment control mode	Program is programmed into touch screen control, PLC system programming
Spray air connection diameter	6mm outer diameter air pipe
Water evaporation capacity	1500-2000 mL/h
nozzle diameter	Optional 1.0/1.5/2.0/2.2mm standard configuration 1.0mm
Spray pressure air inlet	106L/min; Exhaust volume: 36L/min; Input power 580W
atomization mode	2 fluid atomization nozzle 316 material

& nbsp; & nbsp; & nbsp; Spray drying is the most widely used process in the liquid process forming and drying industry. It is most suitable for generating powder

1. the whole machine is made of high-quality stainless steel;
2. the atomization chamber