Details
Cleaning guidelines for battery components:
1. Negative pole shells, spring sheets, and gaskets:**
1.1 Ultrasonic clean for 10-20 minutes using alkaline or neutral solvents (e.g., deionized water);
1.2 Rinse 2-3 times with deionized water, 1-2 minutes each;
1.3 Dry.
2. Positive pole shells (ultrasonic cleaning not recommended to avoid scratching):**
2.1. Soak in alkaline or neutral solvents for 10-20 minutes;
2.2 Same rinsing procedure as above;
2.3 Dry.
Note: KODAK button battery components have been professionally cleaned before delivery and are ready for use without additional cleaning.
2026 coin cell case with PP gasket
Made of stainless steel 304 or 316 with PP sealing O-ring
CR2032 is one of the most popular coin cells which is widely used for small electronics. In battery research field, CR2032 is the most popular half-cell for electrochemical performance characterizations of active electrode materials.
The name of CR2032 is defined by International standard IEC 60086. The first letter, C, identifies the chemical composition “lithium” and a nominal voltage (3V) of battery. The second letter, R, indicates a round (cylindrical) form. The first two digits encode the outer diameter of battery in mm. The last two digits are the overall height of battery in tenths of mm. Therefore, CR2032 stands for " lithium, 20 mm diameter, 3.2 mm height "
Coin Cell Case Suit |
||
|
Product |
Specification |
Material |
|
Coin Cell Case |
CR2032/CR2025/CR2016/CR2430 |
304/316 Stainless Steel |
|
CR20** Spacer |
15.8 × 0.5 mm |
304/316 Stainless Steel |
|
CR20** Spacer |
15.8 × 1.0 mm |
304/316 Stainless Steel |
|
CR20** Spacer |
15.8 × 1.5 mm |
304/316 Stainless Steel |
|
CR20** Spacer |
16.1 × 0.5 mm |
304/316 Stainless Steel |
|
CR20** Spacer |
16.1 × 0.8 mm |
304/316 Stainless Steel |
|
CR20** Spacer |
16.2 × 1.5 mm |
304/316 Stainless Steel |
|
CR24** Spacer |
19.0 × 1.0 mm |
304/316 Stainless Steel |
|
CR24** Spacer |
20.0 × 0.4 mm |
304/316 Stainless Steel |
|
CR20** Funnel Spring |
15.4 × 1.1 mm |
304/316 Stainless Steel |
|
CR20** Funnel Spring |
15.4 × 1.2 mm |
304/316 Stainless Steel |
|
CR20** Funnel Spring |
13.0 × 1.8 mm |
304/316 Stainless Steel |
|
CR24** Funnel Spring |
20.0 × 1.6 mm |
304/316 Stainless Steel |
|
CR20** Wave Spring |
15.4 × 1.0 mm |
304/316 Stainless Steel |
|
CR** Multi Folded Wave Spring |
15.8 × 1.2 mm |
304 Stainless Steel |
Coin Cell Case Detail









Produits et services associes
Completez les flux d assemblage coin-cell avec des materiaux compatibles et un support de fabrication de cellules.
Pastilles lithium
ProduitPastilles lithium, feuille Li et feuille composite Cu-Li pour anodes coin-cell et electrodes de reference.
Associer les boitiers coin cell aux pastilles lithium →Separateurs batterie
RechercheMembranes separatrices pour systemes de recherche coin-cell lithium, sodium et autres.
Voir les separateurs batterie compatibles →Electrolyte sodium
CategorieOptions d electrolyte sodium-ion pour assemblage et validation de coin-cells sodium.
Acheter des electrolytes batterie sodium →Fabrication de cellules
ServiceDemandez un support Canrd pour cellule seche, cellule assemblee ou format personnalise.
Obtenir de l aide pour la fabrication de cellules →


