Details
Detailed technical specifications
| Project | Parameters and Description |
| External dimensions | φ88 mm × H205 mm |
| Mold cavity (working cavity) | Standard inner diameter φ10 mm (mold cavity diameter can be customized) |
| Upper/lower pole | High-strength mold steel |
| Mold cavity lining material | Standard φ10 mm cavity: standard ceramic liner (high hardness, corrosion resistant), PEEK optional; other size cavities: standard PEEK. |
| Maximum load (standard configuration) |
4 tons (standard configuration, corresponding to an internal pressure of approximately 500 MPa in a φ10 mm mold cavity)
(Note: Customized solutions are available for applications requiring higher pressure to achieve final densification or other special processes.)
|
| Operating temperature range |
Room temperature ~ 80℃
|
| Data acquisition system |
Accompanying professional software for sensor use and data recording.
Software download: https://pan.quark.cn/s/8c8a411f134c
|
| Application areas |
Solid-state battery electrolyte sheet preparation, composite electrode pressing, cold/hot pressing of full-cell stacking, and interfacial contact impedance research, etc.
|
| Pressure conversion reference |
When the diameter of the pole is 10 mm, applying a load of about 0.8 tons can generate a pressure of about 100 MPa in the mold cavity.
|