High and low temperature test chamber (80L,-60 ℃)

High and low temperature test chamber (80L,-60 ℃)

Model：
CAN-TES36-0080ET
Applied range：
Equipmentfor testing the performance of materials in various environments and testing the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. Suitable for electronics, electrical appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products for quality testing.
Date issued：
2025-01-07 04:12:04
Equipment Size：
W980*D1580*H920mm
Weight：
220kg

Details

This high and low temperature test chamber, model CAN-TES36-0080ET from Canrd, is designed for environmental reliability testing in battery research and production settings. With an 80-liter internal volume and a minimum temperature of -60°C, it supports precise thermal cycling and stability assessments for various battery formats, including pouch, cylindrical, prismatic, and solid-state cells. The chamber’s controlled environment is well-suited for simulating extreme conditions during material characterization, accelerated aging tests, or charge-discharge cycling. Its compact footprint allows integration into glovebox stacking lines or standalone use in battery test incubators. The unit delivers consistent temperature regulation, making it a practical tool for evaluating the performance and durability of electrodes, electrolytes, and complete battery assemblies under thermal stress.
Equipment Size
Exterior Size: W980 * D1580 * H 920mm; Working Size: W400 * D400 * H500mm Volume: 80L (L)
Power
5.5KW
Power Supply
AC 220V 10%, Frequency: 50HZ
Equipment Weight
220kg
Studio Size
W400 * D400 * H500mm
volume
80L
Heating Rate
≥ 4.0 ℃/min Nonlinear No-load
Cooling Rate
≥ 1.2 ℃/min Nonlinear No-load
Temperature Waviness
± 0.5 ℃
temperature resolution
0.01 ℃
temperature range
-60 ℃ ~ 150 ℃
Temperature Deviation
± 2.0 ℃
Temperature Uniformity
Low Temperature Uniformity ± 1.0 ℃, High Temperature Uniformity ± 2.0 ℃

Equipment for testing the performance of materials in various environments and testing the heat resistance


1. The compressor has overcurrent protection and oil pressure overpressure protection;

2. with heating over-temperature protection, overload short circuit leakage protection, motor overheating protection;

3. The inner box is made of SUS304 stainless steel 1.0mm;

4. The material of the outer box is cold rolled steel plate, plastic spray paint 1.2mm;

5. The control panel adopts 7-inch touch screen controller, power switch, operation indicator light, USB data download interface;


Need R&D Support?

Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.

Experimental Materials

Category

Cathode, anode, electrolyte, separator, and other materials for battery research.

Shop cathode, anode & electrolyte materials →

Lab Equipment

Category

Battery lab equipment for pilot lines, fixtures, and testing workflows.

Browse battery lab equipment →

Electrodes & Cells

Category

Custom electrodes, dry cells, and battery cell components for R&D validation.

View custom battery electrodes & cells →

Sodium Electrolyte

Category

Sodium-ion electrolyte options for sodium battery research and validation.

Shop sodium battery electrolytes →

R&D Services

Service

Full-chain battery R&D services from material evaluation to cell fabrication and failure analysis.

Explore Canrud R&D services →

Material Evaluation

Service

Characterization, electrochemical testing, and compatibility evaluation for battery materials.

Evaluate your battery materials →

Electrode Fabrication

Service

Custom electrode sheets and rolls based on your target chemistry and process needs.

Request electrode fabrication →

Cell Fabrication

Service

Dry cells, assembled cells, and custom-format cell builds for R&D validation.

Build custom research cells →

Contact

Page

Ask Canrud to match products, materials, and services for your project.

Get product and R&D support →