Explosion-proof high and low temperature constant humidity test chamber (150L,-70 ℃)

Explosion-proof high and low temperature constant humidity test chamber (150L,-70 ℃)

Model：
CAN-TES36-0150FR
Applied range：
Equipmentfor testing the performance of materials in various environments and testing the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. Suitable for electronics, electrical appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products for quality testing.
Date issued：
2025-01-07 02:23:50
Equipment Size：
Exteriordimensions: W790 * D1520 * H1670mm working dimensions: W500 * D500 * H600mm volume: 150L (l)
Weight：
220kg

Details

This explosion-proof constant humidity test chamber, model CAN-TES36-0150FR from Canrd, is engineered for safe and reliable environmental testing of battery materials and components under extreme conditions. With a 150-liter interior volume and a minimum temperature of –70 °C, it supports both low‑temperature and humidity‑controlled stability assessments. The integrated explosion‑proof design makes it particularly suitable for testing flammable or reactive materials—such as lithium‑ion electrolytes or solid‑state battery precursors—where conventional chambers pose safety risks. Its precise humidity regulation and wide temperature range enable accelerated aging, thermal shock, and cyclic durability evaluations, essential for validating cell performance and failure mechanisms. Typical applications include pouch cell, cylindrical, and prismatic battery safety testing, as well as research into moisture‑sensitive solid‑state electrolytes and electrode coatings. The chamber meets high‑reliability laboratory standards without over‑specified marketing claims, providing a robust, controlled environment for advanced battery R&D and quality control.
Equipment Size
Exterior Size: W790 * D1520 * H1670mm Working Size: W500 * D500 * H600mm Volume: 150L (L)
Power
6KW
Power Supply
AC 220V 10%, Frequency: 50HZ
Equipment Weight
220kg
temperature deviation
2.0 ℃
Heating rate
≥ 4.0 ℃/min nonlinear no-load
Cooling rate
≥ 1.2 ℃/min nonlinear no-load
humidity deviation
3.0
humidity range
20% ~ 98% R.H
humidity fluctuation
2.5 R.H
Temperature resolution
0.01 ℃
Volume
150L
Working room size
W500 * D500 * H600mm
temperature uniformity
low temperature uniformity ± 1.0 ℃, high temperature uniformity ± 2.0 ℃
Temperature range
-70 ℃ ~ 150 ℃
Temperature fluctuation
± 0.5 ℃
humidity resolution
0.1%R.H

Equipment for testing the performance of materials in various environments and testing the heat resistance


1. The compressor has overcurrent protection and oil pressure overpressure protection;

2. With heating over-temperature protection, overload short-circuit leakage protection, motor overheating protection and water shortage protection;

3. The inner box is made of SUS304 stainless steel 1.0mm;

4. The material of the outer box is cold rolled steel plate, plastic spray paint 1.2mm;

5. The control panel adopts 7-inch touch screen controller, power switch, operation indicator light, USB data download interface;


Need R&D Support?

Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.

Experimental Materials

Category

Cathode, anode, electrolyte, separator, and other materials for battery research.

Shop cathode, anode & electrolyte materials →

Lab Equipment

Category

Battery lab equipment for pilot lines, fixtures, and testing workflows.

Browse battery lab equipment →

Electrodes & Cells

Category

Custom electrodes, dry cells, and battery cell components for R&D validation.

View custom battery electrodes & cells →

Sodium Electrolyte

Category

Sodium-ion electrolyte options for sodium battery research and validation.

Shop sodium battery electrolytes →

R&D Services

Service

Full-chain battery R&D services from material evaluation to cell fabrication and failure analysis.

Explore Canrud R&D services →

Material Evaluation

Service

Characterization, electrochemical testing, and compatibility evaluation for battery materials.

Evaluate your battery materials →

Electrode Fabrication

Service

Custom electrode sheets and rolls based on your target chemistry and process needs.

Request electrode fabrication →

Cell Fabrication

Service

Dry cells, assembled cells, and custom-format cell builds for R&D validation.

Build custom research cells →

Contact

Page

Ask Canrud to match products, materials, and services for your project.

Get product and R&D support →