Details
Operating temperature and relative humidity range | ≤ 70% RH (no water vapor condensation) |
channel control mode | independent control |
protection | power-down data protection; With offline test function; The safety protection conditions can be set, and the setting parameters include: upper voltage limit, lower voltage limit, upper current limit, lower current limit, upper capacity limit, delay time |
Storage temperature and relative humidity range | ≤ 80% RH (no water vapor condensation) |
cycle | cycle test range: 1~65535 times; Number of single cycle steps: 254; Loop nesting: with nested loop function, maximum support for 3-layer nesting |
charging mode | 1. constant current, constant voltage, constant current, constant voltage, constant power charging, 2. cut-off conditions: voltage, current, relative time, capacity, energy,-△V |
database | MySQL database is used to centrally manage test data |
Storage temperature range | -10 ℃ ~ 50 ℃ |
noise | <45dB |
Server disk configuration | 500GB |
Number of channels of the whole machine | 8 |
current and current detection sampling | four-wire connection |
discharge mode | 1. constant current discharge, constant power discharge, constant resistance discharge, constant voltage discharge, constant current and constant voltage discharge, 2. cut-off conditions: voltage, current, relative time, capacity, energy |
Data Record | Time recording interval: 100ms, voltage recording interval: 10mV, current recording interval: range 1: 2uA; Range 2: 0.01mA; Range 3: 0.02mA |
channel characteristics | constant current source and constant voltage source adopt double closed loop structure |
Operating temperature range | 0 ℃ ~ 40 ℃ (within 25±10 ℃, guaranteed measurement accuracy: accuracy drift 0.005 of FS /℃) |
recording frequency | 10HZ |
DCIR test | support for DCIR calculation at custom points |
Chassis size per unit | W483.6mm * D321.5mm * H48.5mm |
pulse mode | charge: constant current mode, constant power mode; discharge: constant current mode, constant power mode; minimum pulse width: 500ms; Number of pulses: a single pulse step supports 32 different pulses; Continuous switching of charge and discharge: one pulse step can realize continuous switching from charge to discharge; Cut-off conditions: voltage, relative time |
input power | AC 220V 10% / 50Hz |
voltage | constant voltage range control: 25mV ~ 5V; Minimum discharge voltage:-5V; Accuracy: 0.05 of FS; Stability: ± 0.05 of FS |
IP protection level | protection level IP20 |
Fixture type | Upper and lower fixture |
data output mode | EXCEL2003,2010, TXT |
input impedance | ≥ 1GΩ |
Leakage current | 0.005μA |
time | current response time (10% FS ~ 90% FS) <500 μs; Work step time range ① ≤(365*24) hours/work step; ② Time format supports 00:00:00:00(h, min, s, ms) |
Current | Output range per channel: 5μA ~ 1mA;1mA ~ 5mA;5mA ~ 10mA; Accuracy: ± 0.05 of FS; Constant voltage cut-off current: 2μA;0.01mA;0.02mA; Stability: 0.05 of FS |
input active power | 25w |
Power | Maximum output power of single channel: 0.05W; Stability: ± 0.1 of FS |
Communication interface | Network port |
& nbsp; & nbsp; & nbsp; Can be used for the detection of lithium battery materials and super capacitors and other batteries.
1. Continuous switching of charging and discharging: One pulse work step can realize continuous switching from charging to discharging;
2. Support the calculation of DCIR by user-defined points;
3. Cycle test range: 1~65535 times;
4. With nested loop function, the maximum support 3 layers of nesting;
5. Protection grade IP20;
6. constant current source and constant voltage source with double closed loop structure.
Need R&D Support?
Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrud R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrud to match products, materials, and services for your project.
Get product and R&D support →