Pressure fixture (acrylic)
Pressure fixture (acrylic)
Pressure fixture (acrylic)

Pressure fixture (acrylic)

$28.69
item_NoSpecificationsPrice
CF-TES-SFG10160160Asoft pack battery fixture (including screw, wing nut, gasket and other accessories)$28.69
✓ Selected: CF-TES-SFG10160160A / soft pack battery fixture (including screw, wing nut, gasket and other accessories)
Quality Assurance
Factory Direct
Global Shipping

Details

when it is used to clamp the soft pack battery, cold press or hot press the soft pack battery first. before using the same type of battery for the first time, test the unclamped thickness size, then place the soft pack battery in the middle of the clamp, lock the wing nut to about 0.5-2mm smaller than the thickness size of the soft pack, and ensure that the clamp successfully clamps the soft pack battery and applies pressure.

Keep away from extremely hot environments

Professional battery test splint, special for laboratory electrochemistry, suitable for all kinds of soft pack batteries and single batteries. Clamping solid deformation, exquisite wear-resistant and corrosion-resistant workmanship.

the size range of the fixture is recommended to be 12cm wide * 15cm long * 2cm thick

The plate is acrylic

Need R&D Support?

Browse key product categories and connect battery materials with Canrd's R&D services for testing, fabrication, and project support.

Experimental Materials

Category

Cathode, anode, electrolyte, separator, and other materials for battery research.

Shop cathode, anode & electrolyte materials →

Lab Equipment

Category

Battery lab equipment for pilot lines, fixtures, and testing workflows.

Browse battery lab equipment →

Electrodes & Cells

Category

Custom electrodes, dry cells, and battery cell components for R&D validation.

View custom battery electrodes & cells →

Sodium Electrolyte

Category

Sodium-ion electrolyte options for sodium battery research and validation.

Shop sodium battery electrolytes →

R&D Services

Service

Full-chain battery R&D services from material evaluation to cell fabrication and failure analysis.

Explore Canrd R&D services →

Material Evaluation

Service

Characterization, electrochemical testing, and compatibility evaluation for battery materials.

Evaluate your battery materials →

Electrode Fabrication

Service

Custom electrode sheets and rolls based on your target chemistry and process needs.

Request electrode fabrication →

Cell Fabrication

Service

Dry cells, assembled cells, and custom-format cell builds for R&D validation.

Build custom research cells →

Contact

Page

Ask Canrd to match products, materials, and services for your project.

Get product and R&D support →