Horizontal Hot Press Formation Machine (5V6A32CH)

Model：

CAN-FOR50-5V6A32CHW

Applied range：

Itis used for the formation process of single-head pole ear soft-pack lithium-ion battery. By heating the aluminum plate to clamp the cell, the cell is formed by rapid heat conduction. Place the battery to clamp between the pressure plate, and clamp by cylinder. Single equipment 32 points, 1 sets of fixtures, maximum charge and discharge current 6A.

Date issued：

2025-01-06 03:13:05

Equipment Size：

1650× 800 × 1800mm

Weight：

500kg

Details

weight	500kg
power	about 5KW
Equipment size	1650 × 800 × 1800mm
power supply	AC220V/380V/50Hz/60Hz

communication mode of upper computer	based on TCP/IP protocol
channel control mode	independent control
Time	1. Current response time:<1ms;2. Work step time range: ≤(365*24) hours/work step, time format supports 00:00:00:00:00(h, min, s, ms)
protection	1. power-down data protection; 2. with offline test function; 3. can set security protection conditions, setting parameters include: voltage upper limit, voltage lower limit, current upper limit, current lower limit, capacity upper limit, delay time, with reverse connection protection function
communication interface	network port
Pressure accuracy	± 20kg
resolution	ad: 16bit;DA:16bit
cycle	1. cycle test range: 1~65535 times; 2. Number of single cycle steps: 254;3. Loop nesting: with nested loop function, maximum support for 3 layers of nesting
database	MySQL database is used to centrally manage test data
Working pressure	5.0~7.0kgf/cm (I .e. 0.5~0.7MPa)
discharge	1. Discharge mode: constant current discharge, constant voltage discharge, constant current constant voltage discharge, constant power discharge, constant resistance discharge; 2. Cutoff conditions: voltage, current, relative time, capacity and energy;
noise	<55dB
Temperature range	Normal temperature ~ 90 ℃
server operating system	Windows 7
channel characteristics	Constant current source and constant voltage source adopt double closed-loop structure
Heating method	Silicone heating plate
server disk configuration	500GB
Initial heating time	≤ 30 minutes (target temperature: 80 ℃)
voltage and current detection sampling	four-wire connection
charging	1. Charging mode: constant current charging, constant voltage charging, constant current constant voltage charging, constant power charging; 2. Cutoff conditions: voltage, current, relative time, capacity, energy,-△V
pulse mode	1. charging: constant current mode, constant power mode; 2. Discharge: constant current mode, constant power mode; 3. Minimum pulse width: 500ms;4. Number of pulses: 32 different pulses are supported in a single pulse step; 5. Continuous charge and discharge switching: one pulse work step can realize continuous switching from charging to discharging; 6. Cut-off conditions: voltage, relative time
leakage current	<5μA
Pressure range	300~1800kg
Temperature accuracy	± 3 ℃
data recording	1. data recording conditions: a. minimum time interval: 100ms; B: minimum voltage interval: 10mV; C: minimum current interval: range 1: 0.2mA; Range 2: 6mA; Range 3: 12mA;2. Recording frequency: 10Hz
voltage	1. constant voltage range control: 25mV ~ 5V;2. minimum discharge voltage: both ends of the upper and lower clamps can be discharged to 1V, and the 2m line length can reach 1.5V;3. Accuracy: 0.05 of FS;3. Stability: 0.05 of FS.
IP protection level	protection level IP20
data output mode	EXCEL2003,2010, TXT
input impedance	≥ 1MΩ
DCIR	support custom points for DCIR calculation
Current	1. Output range of each channel: range 1: 0.5 mA-0.1A; Range 2: 0.1A-3A; Range 3: 3A-6A;2. Accuracy: 0.05 of FS;3. Constant voltage cut-off current: range 1: 0.2mA; Range 2: 6mA; range 3: 12mA;4. Stability: ± 0.05% of FS.
Power	1. Single channel output power: 30W;2. Stability: ± 0.1 of FS

is used for the formation process of single-head pole ear soft package lithium ion battery. By heating the aluminum plate to clamp the cell

1. Adopting cylinder pressurization and controlled by PLC through electrical proportional valve, it can realize multi-time and multi-stage pressure adjustment.

2. The temperature is controlled by the PLC control temperature module.

3. The pole lug pressing block is made of insulating material injection molding.

4. The lug pressure block compression spring adopts die spring or 304 stainless steel spring.

5. Protection function

Software over-voltage, under-voltage, over-current, under-current, over-capacity protection.
There is an emergency stop button, and the clamp will automatically open when the emergency stop occurs.
A smoke alarm is installed. When a smoke alarm occurs, the machine stops running and alarms.
After the equipment is stopped by the alarm, the unfinished process can be continued from the interrupted position without starting the process from the beginning.
if the communication between the lower computer and the upper computer is interrupted and the communication returns to normal, the work can be continued according to the original process.
over-temperature protection. when the set temperature is exceeded, the system will automatically cut off the heating and formation process of tools and give an alarm.
When the equipment is abnormally powered off, the current process step can be continued.
when the time communication is interrupted or the PC fails, the equipment will enter the waiting state and continue the current process after the communication is quickly reset.