Hot press forming machine (manual, 8CH)

Hot press forming machine (manual, 8CH)

Model：
CAN-FOR0A-5V6AHM
Applied range：
Themanual battery hot press forming machine is mainly used for the forming process of soft package lithium ion battery in hot press state. This equipment can replace the baking and shaping process in the traditional battery formation process, thereby shortening the formation time and reducing labor costs.
Date issued：
2024-12-02 01:07:17
Equipment Size：
550mm* 600mm * 950mm
Weight：
200kg

Details

voltage range
charging: 0V ~ 5V; discharge: 2V ~ 5V
rated power
1kW
temperature range
0~90 ℃
rated voltage
AC220V/50Hz
Equipment weight
approx. 200kg
equipment size
550mm * 600mm * 950mm
current range
0A ~ 6A
voltage accuracy
± 0.05 FS
Maximum Heating Power
600W (200W per heating plate, 3 layers in total)
Charging
Charging mode: constant current charging, constant current and constant voltage charging, cut-off conditions: voltage, current, time
Current Resolution
1mA
Maximum Input Power
1.0kW
voltage resolution
1mV
output current
0A ~ 6A
Number of Equipment Channels
8CH
protection
channel protection: over and under voltage, over current/short circuit, battery reverse connection, over temperature protection, etc., step protection: voltage/current upper and lower limit, charge and discharge capacity upper limit protection, etc., emergency stop protection: pressing emergency stop button to stop the equipment
Current Accuracy
± 0.05 FS
Cycle
Cycle times: 1~65000, cycle steps: step 1~256, loop nesting: level 1~9
single point control
each channel operates independently without interference
Charge and discharge rise time (10% ~ 90%)
≤ 20ms
Overall Efficiency
≥ 70%
Heat Preservation Power
300W
Equipment Pressure
150kg ~ 2000kg
converted into power supply model
BTS5V6A-8CH
Charge and discharge conversion time (-90% ~ 90%)
≤ 40ms
Current Stability
± 0.05 FS
Temperature Control System
normal temperature ~ 90 ℃, normal temperature ~ 60 ℃ heating time ≤ 25min temperature difference 2 ℃
output voltage
charging: 0V ~ 5V; Discharge: 2V ~ 5V
Conversion Power
240W (30W per channel, 8 channels in total)
Single Channel Output Power
0W ~ 30W

& nbsp; & nbsp; & nbsp; The manual battery hot press forming machine is mainly used for the forming process of soft package lithium ion batteries under hot press. This equipment can replace the baking and shaping process in the traditional battery formation process


1. The safety protection performance of this machine is perfect. The pressurization can only be started after the insulation door is closed to ensure the safety of the operator;

2. Adjustable temperature and pressure, can adapt to a variety of working conditions;

3. It can meet the needs of a variety of battery specifications, and can also be customized according to customer requirements;

4. the equipment pressure hand type adopts mechanical jack, the pressure value is more stable, and the hand wheel pressure is labor-saving.