Sodium-Ion Battery Cathode Electrode Sheet (Sodium Nickel Iron Manganese Oxide NTO2XX)

Name: Sodium-Ion Battery Cathode Electrode Sheet (Sodium Nickel Iron Manganese Oxide NTO2XX)
Brand: Canrud
Price: 135.92 USD
Availability: InStock

$135.92

Model：

CU-EL-PS-1003

item_No

Specifications

Price

CU-EL-PS-100301

Single-sided (5 pieces/pack) (rolled).

$135.92

Details

Specifications

Details

Because it is a single-sided electrode, there will be a curl after rolling, so the shipped roller-pressed electrode has controlled and compacted to ensure that the electrode is not rolled;

Rolling can improve the compacting density of the electrode, improve the electronic conductivity of the electrode, and improve the bonding.

1. The electrode should be rolled before use, and the customer needs to arrange the rolling pressure by himself to purchase the electrode that has not been rolled;

2. The surface density shall be determined according to the actual weighing results;

3. Before putting it in the glove box, the punched electrode needs to be vacuum baked at a temperature of 105 °C for 4 hours;

4. This electrode can be matched with our YT0101 anode electrode; 5. The density of the coating surface does not include the current collector;

6. Theoretical surface capacity mAh/cm2 = coating surface density mg/cm2 * proportion of active substance * gram capacity mAh/g÷1000;

7. The amount of theoretical active substance (mg) = coating surface density mg/cm2 * proportion of active substance * small disc area cm2;

8. The actual weighing calculates the amount of active substance (mg) = (weight of small disc mg - current collector surface density mg/cm2 * small disc area cm2) * proportion of active substance, and calculates the gram capacity according to the amount of active substance actually weighed, due to the tolerance of the density of the coating surface, the actual weighing shall prevail.

This product must be tested in accordance with the test methods and electrolytes recommended by Coulter to achieve the corresponding performance.Since the test method and electrolyte have a great influence on the performance of the battery, any change in the test method or electrolyte may reduce the performance of the pole piece; be sure to check this information before purchasing.

Surface density of the current collector (mg/cm²)	3.3
Current collector thickness (µm)	12 (aluminum foil)
Electrode size	10*10cm
active ingredient ratio	95.50%
Electrode types compatible with full-cell batteries (N/P ratio)	YT02XX(1.16)
Compacted density (g/cc)	2.00-2.50 (Compaction value not provided for unrolled electrode sheets; calculate it yourself)
Active materials	Sodium nickel iron manganate
Shelf life	Store for six months (vacuum sealed); use within one month of opening.
Recommended electrolyte	KLD-NC06
Extreme film name	Sodium-nickel iron manganese oxide electrode
Electrode Number	NT02XX
Active material specific capacity (mAh/g)	120 (2.00-4.00V)
Test Conditions Description	At room temperature (25℃), let stand for 4 hours, charge at a 0.1C rate (constant current) to 4.00V, charge at 4.00V constant voltage to 0.02C, let stand for 3 minutes, discharge at a 0.1C rate (constant current) to 2.00V, and let stand for 3 minutes.
Test conditions	Normal temperature 25℃, 0.1/0.1C, 2.00-4.00V
Surface capacity (mAh/cm²)	1.49
Coating areal density (mg/cm²)	12.27 (tolerance is ±2.0%)
Usage Recommendations	1. If the electrode sheet is not rolled, it generally needs to be rolled before punching and baking (the compaction density can be referenced from the minimum value in the "Compaction Density" column of this table); 2. Baking conditions: 85-105℃ for 4 hours (if vacuum baking, it needs to be ventilated twice); 3. The mass of active material needs to be determined according to the actual weight of each small disc.