Details
Product model: GMSS01
Product thickness(um) 13.1
Base film thickness PE（um） 8.6
Product width(mm) 97
Breathability(sec/100ml) 201
Surface density(g/m2) 10.5
Puncture Strength Φ1.0mm(gf) 434
Heat shrinkable 130℃×1h MD（%） 1.30
Heat shrinkable 130℃×1h TD（%） 1.35
Tensile strength MD（Kgf/cm2） 1669
Tensile strength TD（Kgf/cm2） 1790
Elongation at breakMD（%） 105
Elongation at breakTD（%） 70
Peel Strength（N/m） 87.3
Can be used as a control group for routine laboratory testing to study the cathode and anode reactions of LATP. Can be used for liquid lithium batteries, semi-solid lithium batteries, coin cell, and pouch cell, but cannot be used for pure solid state batteries or sodium batteries. Exposed to air is relatively stable, but it is best to operate in a dry room and store it sealed after use.
A represents alumina, L represents LATP, and B represents boehmite.
The thickness of the PE base film is 9um, and the LATP coating of the oxide solid electrolyte on both sides is 2um each, applied on both sides of the PE base film
Need R&D Support?
Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.
Experimental Materials
CategoryCathode, anode, electrolyte, separator, and other materials for battery research.
Shop cathode, anode & electrolyte materials →Lab Equipment
CategoryBattery lab equipment for pilot lines, fixtures, and testing workflows.
Browse battery lab equipment →Electrodes & Cells
CategoryCustom electrodes, dry cells, and battery cell components for R&D validation.
View custom battery electrodes & cells →Sodium Electrolyte
CategorySodium-ion electrolyte options for sodium battery research and validation.
Shop sodium battery electrolytes →R&D Services
ServiceFull-chain battery R&D services from material evaluation to cell fabrication and failure analysis.
Explore Canrud R&D services →Material Evaluation
ServiceCharacterization, electrochemical testing, and compatibility evaluation for battery materials.
Evaluate your battery materials →Electrode Fabrication
ServiceCustom electrode sheets and rolls based on your target chemistry and process needs.
Request electrode fabrication →Cell Fabrication
ServiceDry cells, assembled cells, and custom-format cell builds for R&D validation.
Build custom research cells →Contact
PageAsk Canrud to match products, materials, and services for your project.
Get product and R&D support →