Metal Strip

$407.75

Model：

MA-EN-AN-0009

item_No

Specifications

Price

MA-EN-AN-000901

Metal belt -100um 100um x 60mm x 50g

$407.75

Details

Specifications

Details

This product is easily reactive with oxygen and nitrogen in humid air, and can react violently, burn or even explode when in contact with water. Use dry sand or dry powder fire extinguisher to put out fires.

The packaging of this product is made of aluminum-plastic composite bag and sealed with argon. Please do not vacuum treat the packaging in the transition bin for a long time to avoid oxidation and deterioration of the product due to negative pressure causing the packaging to burst.

The following lengths are calculated based on weight and density theory and are for reference only.

Specification	Theoretical Length
Metal Strip - 100um 100um60mm50g	15m
Metal Strip - 100um 100um60mm50g	18m

Suggested storage method: After unpacking and using the glove box, seal the packaging in a timely manner before storage (it is recommended to use the original aluminum-plastic bag for packaging, and it is strictly prohibited to use packaging bags that have not been dried properly). Most products in the glove box have attached water (natural air) on the surface, and if left open in the glove box, they are easily affected by other items and may change color.

This product has a smooth, bright, oil-free, perforation-free, and tear-free surface.

This product is sold by Huizhou Canrd New Material Technology Co., Ltd.

A video must be recorded before opening the product. This video must include the dew point in the drying room or the water and oxygen content in the glove box, the product's production date, and a clear view of the product's appearance. Any product with abnormal appearance after opening without video evidence will not be processed (appearance abnormalities after the expiration date will not be accepted).

1. Opening environment filming: Dry room (dew point -45℃) or glove box with qualified water and oxygen (H2O, O₂) <0.1 ppm;

2. Filming the can/packaging label to ensure it is sealed properly, showing the production date. If the packaging is intact, open and inspect the product. Film the product up close to clearly see its true condition. Then, remove the product and place it in a stainless steel or ceramic dish for close inspection. Take a small portion of the product for clear localized filming. The entire unpacking video must be filmed continuously.

Failure to follow these instructions will be considered a product defect caused by the user.

Standard processable metal strip specifications: Thickness ≥ 0.02mm, Width ≤ 120mm. Other special specifications will be discussed separately.

Purity: 99.95%

Storage and usage suggestions:

1. Aluminum plastic tape sealed packaging (atmosphere: dry air with dew point below -45 degrees or clean inert gas, not mixed with other volatile gases to prevent reaction and damage to the product). After use, please seal the remaining products in a timely manner to reduce product exposure time, and also pack them inside the glove box.

2. Please seal tightly and check if the surface of the packaging bag is intact.

When using the drying room, the dew point should be below -45 degrees Celsius and the relative humidity should be ≤ 0.3%. If the humidity is higher than this, please shorten the exposure time.

4. Wear gloves and masks during homework to avoid contamination of the product by human body surface and breathing.

5. Do not open the package for use in the presence of volatile organic solvents.

6. Sealed storage environment: A dry environment with indoor temperature ≤ 32 ℃ and humidity ≤ 75% should be equipped with an air conditioning system as needed to control indoor temperature and humidity.