Roller press (210 × 330mm)

Roller press (210 × 330mm)

Model：
CAN-CAL17-2133LC
Applied range：
Therolling mill is the main equipment in the continuous rolling production line, which is composed of cast steel gantry frame, roller, frequency conversion motor reducer, electric booster system, gap adjustment system, electrical control system, feeding guard plate and roller surface cleaning mechanism.
Date issued：
2025-01-06 00:38:07
Equipment Size：
1570*680*1255mm

Details

compressed air
0.6MPa ~ 0.8MPa
weight
about 1.2 tons
equipment size
1570*680*1255mm
power
4.7kW
power supply
380V/50Hz
machine efficiency
0.8~5 M/min
machine speed
2 ~ 8r/min
pole piece or foil type
battery pole piece
Roll quenching layer
Depth of quenched layer 18~25mm
effective use width
300mm
roll surface roughness
Ra≤ 0.04
Roll surface hardness
HRC66 above
maximum rolling force
68T
chromium plating of roll
≥ 0.18MM
Thickness uniformity of pole piece after rolling
Under the premise that the user guarantees coating uniformity ≤ ± 0.002mm, the two rolls are arranged horizontally up and down in the press roll layout
Coating uniformity
± 0.002mm (user guarantee)
roll diameter jump
≤ ± 0.002mm
Roll material
9Cr3Mo series high alloy cold roll steel
Roll specification
#210 X330mm (roll surface diameter x roll surface width)

The rolling mill is the main equipment in the continuous rolling production line. It is composed of cast steel gantry frame


1. This equipment adopts servo to adjust the roll gap, and the linear speed is adjusted by frequency converter to realize stepless speed regulation;

2. roll gap adjustment: in the state of no pressure, through the man-machine interface to adjust the change of roll oil pressure; roll movement value by the man-machine interface screen display; man-machine interface input adjustment to change the oil pressure on the roll gap. The adjustment range of the servo display screen is 0~2.0mm;

3. Heating: The closed-loop control heating system is composed of Omron temperature controller, solid-state relay and K-type thermocouple;

4. make the pole piece under the rolling of the roller, make the pole piece reach the appropriate compactness, and according to the coating thickness to meet the pole piece thickness requirements.