316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)
316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)
316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)
316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)
316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)
316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)

316L Japanese Coin Cell Case – 5-Piece Set with PP Gaskets (Separated)

$151.02
item_No
Specifications
Price
CR2032 positive shell negative shell PP rubber ring 16*0.5mm gasket 15*1.4mm wave shrapnel
10 sets
$151.02

Details

Note: Measurements are taken manually; slight deviations may occur.

 

Assembly Instructions

  1. Assembly sequence:
    Positive Case → Electrode → Separator → Gasket → Lithium Foil → Spacer → Spring → Negative Case
  2. A small amount of electrolyte can be added before placing the electrode, separator, and lithium foil to help position and secure the components. Add the remaining electrolyte before final sealing.
  3. The gasket has a top and bottom side. The open side (larger inner diameter) should face the negative case during assembly.
  4. The overall diameter of this coin cell case is larger than standard coin cell cases. Please use a compatible crimping machine for proper sealing.

 

Cleaning Recommendations for Positive Case, Gasket, Spacer, Spring, and Negative Case

  1. Use an alkaline or neutral solvent (e.g., deionized water) and perform ultrasonic cleaning for 10–20 minutes.
  2. Rinse with deionized water using ultrasonic cleaning 2–3 times, 1–2 minutes each time.

  3. ⚠️ Note: The positive case is prone to scratches when in contact with other parts; ultrasonic cleaning is not recommended.

  4. Dry thoroughly after cleaning.