Double planetary vacuum mixer (15L)
Model：
CAN-MIX13-0015LV
Applied range：
Thisequipment is intelligently controlled by a control panel or a central control system, and can operate automatically according to the prepared mixing process flow. It is equipped with two spiral stirring paddles and two sets of zigzag dispersion discs, driven by double planetary structure respectively, which can meet the high-efficiency mixing between various powders and liquids. After stirring and dispersing, the particle size, uniformity of particle distribution and consistency of viscosity are controlled. At the same time, the stirring barrel has the functions of rapid replacement and vacuum sealing, by means of vacuum, the bubbles in the slurry can be eliminated, so as to meet the requirements of stirring and pulping process.
Date issued：
2024-12-27 03:42:19
Equipment Size：
L1660mm* W900mm * H1700mm
Weight：
1200kg
Details
Volume (L) | Design Volume 25L Operating Volume 15L |
Equipment Size | L1660mm * W900mm * H1700mm |
Site Bearing | Ground load-bearing requirement ≥ 1200kg/m² |
Operating Environment | regular Environment |
Power | About 7.75kW |
Power Supply | AC:3*380V, 50HZ |
Equipment Weight | About 1.2 Tons |
window port | DN80 |
Dispersion Speed | 0~5500 r/min, Frequency Conversion Speed Regulation |
equipment capacity | equipment failure rate ≤ 2% |
Not Applicable | Acetone Solvent |
stirring mode | double spiral stirring paddle and double dispersion shaft (four dispersion discs) |
dispersion motor power | 3kW |
cold and hot water | temperature: 8~20 ℃,0.1~0.4MPa, inlet and outlet pressure difference ≧ 0.1MPa, lower inlet and outlet |
safety protection function | 1. acousto-optic warning function: acousto-optic alarm for the lifting of the mixing barrel; 2. Limit function: the mixer can only work after the mixing barrel is in place; 3. Self-locking function: the barrel body cannot lift when the mixer is working; 4. vacuum function: the upper and lower barrels with vacuum cannot be separated; 5. electrical protection: emergency stop protection of operators, grounding protection of equipment, automatic shutdown alarm of power overload; 6. power phase sequence fault alarm. |
discharge port | DN25 ball valve controls discharge port |
spotlight window | DN80 |
lower barrel cooling circulating water inlet and outlet | DN15 |
vacuum | interface DN155(<-0.096MPa, flow rate> 0.3 m/min) |
nitrogen | interface DN15(0.2~0.5MPa, nitrogen flow rate> 0.3 m/min) |
applicable powder | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobaltate, ternary, graphite, etc. |
Compressed air | Interface Φ8 air pipe (0.4~0.6MPa, flow rate> 0.3 m/min) |
Applicable Slurry | Viscosity: 1,000~100000 MPa.s, Solid Content: 30% ~ 70%, and 85% ~ 100 |
Stirring paddle speed | 5~55 r/min, frequency conversion speed regulation |
equipment bearing temperature | 7 ℃ ~ 80 ℃, customers are required to provide circulating cold and hot water |
Feeding port 2 | DN15 clamp type |
revolution speed | 0~27 r/min |
revolution motor power | 3kW |
vacuum pressure maintaining | static 12H vacuum leakage rate ≤ 10% |
Agitator Payload | ≧ 3Nm/cm |
lifting motor power | 0.75kW |
Applicable Additives | SBR, CNT, etc. |
feeding port 1 | DN80 clamp type |
& nbsp; & nbsp; & nbsp; This equipment is intelligently controlled by a control panel or a central control system
1. adopt the intelligent control of the control panel or the central control system