Coated Carbon Copper Foil
Coated Carbon Copper Foil
Coated Carbon Copper Foil

Coated Carbon Copper Foil

$151.02
Model：
MA-EN-CU-0004
item_No
Specifications
Price
MA-EN-CU-007101
Carbon-Coated Copper Foil — Single-Sided (8+1) μm × 263 mm (Coating Width: 232 mm) × 1 kg
$151.02

Details

This product, Canrd's coated carbon copper foil (model MA-EN-CU-0004), is developed as a specialized current collector for lithium-ion battery research and energy material experiments. Unlike conventional copper foil, it features a single-sided carbon coating approximately 1 μm thick, applied uniformly to enhance electrical conductivity, reduce internal resistivity, and improve mechanical toughness. The carbon layer also helps suppress burr-induced short circuits, strengthens adhesion of the electrode material, and supports higher discharge capacity over extended battery cycles. Available in rolls with a substrate thickness of 8 μm and a coating width of 232 mm, it is primarily intended for use as a negative electrode substrate in prototype cells or laboratory-scale battery assemblies. For smaller trial runs, sheet-form samples (~A4 size, 1 m² total area) are also offered. This foil balances practical handling with reliable performance for systematic electrode optimization studies.

Coated Carbon Copper Foil

Product Advantages：

Carbon-coated copper foil is a new type of battery anode substrate.

Compared with traditional copper foil, carbon-coated copper foil has better conductivity and lower internal resistivity, stronger mechanical properties and better toughness.

It can avoid short circuits caused by burrs, improve the adhesion of electrode materials, increase the discharge capacity of the battery and extend the service life of lithium-ion batteries.

Product Description and Suggestions：

Good coating uniformity and consistency, single-side coating thickness ~1μm.

The thickness in the specifications is calculated as substrate thickness * substrate width * roll weight.

Different roll weights indicate different lengths in meters.

Stock product specifications may differ from the data on the official website; please consult customer service for specific purchases.

The 1m2 product is in sheet form, approximately the size of an A4 paper.

Each shipment contains approximately a dozen sheets (with a total effective area of 1m2).

Need R&D Support?

Browse key product categories and connect battery materials with Canrud's R&D services for testing, fabrication, and project support.

Experimental Materials

Category

Cathode, anode, electrolyte, separator, and other materials for battery research.

Shop cathode, anode & electrolyte materials →

Lab Equipment

Category

Battery lab equipment for pilot lines, fixtures, and testing workflows.

Browse battery lab equipment →

Electrodes & Cells

Category

Custom electrodes, dry cells, and battery cell components for R&D validation.

View custom battery electrodes & cells →

Sodium Electrolyte

Category

Sodium-ion electrolyte options for sodium battery research and validation.

Shop sodium battery electrolytes →

R&D Services

Service

Full-chain battery R&D services from material evaluation to cell fabrication and failure analysis.

Explore Canrud R&D services →

Material Evaluation

Service

Characterization, electrochemical testing, and compatibility evaluation for battery materials.

Evaluate your battery materials →

Electrode Fabrication

Service

Custom electrode sheets and rolls based on your target chemistry and process needs.

Request electrode fabrication →

Cell Fabrication

Service

Dry cells, assembled cells, and custom-format cell builds for R&D validation.

Build custom research cells →

Contact

Page

Ask Canrud to match products, materials, and services for your project.

Get product and R&D support →